HIGH PRESSURE CONNECTORS V SERIES

Precision modular connectors to suit your application Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than 80 countries with the help of over 40 subsidiaries and distributors. Over 75000 connectors The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of handling cable diameters up to 30 mm and for up to 114 contacts. This vast portfolio enables you to select...

V Series V series connectors have been developed for utilisation where protection must be guaranteed under high pressures of liquids. The basic elements, insulators, contacts and clamping system are from the S and E series. The push-pull latching system has been replaced by a screw coupling system with watertightness maintained by compression of an O-ring in FPM (Viton®) according to the triangular shaped cavity principle. There are multiple application possibilities, from nuclear physics to the petroleum industry. After cable assembly the rear part must be covered with an adhesive heatshrink...

Part Number Example Straight plug with cable collet F V N . 2 V . 3 0 6 . C L A C 6 0 Model: (page 3) Series: (page 3) Variant: (page 15) 2) Z = nut for fitting a bend relief Insert configuration: (page 7) Housing: C = brass chrome-plated S = stainless steel AISI 304 L Collet type: C = cable collet K = oversize cable collet Contact type: A = male to solder FVN.2V.306.CLAC60 = straight plug with cable collet, 2V series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 6 mm diameter cable. Free socket with cable collet P...

Models Technical Characteristics Electrical Mechanical and Climatical Value Temperature range Salt spray corrosion test 2) Protection index (mated) Resistance to hydrostatic pressure (mated) Climatical category Shielding efficiency Note: 1) in order to perform correctly and withstand the pressure, cable assembly shall be made according to instruction we recommand. See page 18. 2) for chrome plated product (« C» material code).    Straight plug with cable collet Dimensions (mm) Straight plug with oversize cable collet 1) Note: 1) correspond to K type of collet, the fitting of oversize collets...

Straight plug, cable collet and nut for fitting a bend relief 1) Note: 1) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see pages 141 and 142 of the unipole/multipole catalog). Fixed socket, nut fixing Panel cut-out (page 15) Note: the 5V series is delivered with a round nut. Fixed socket, cable collet, nut fixing Panel cut-out (page 15) Note: the 5V series is delivered with a round nut.

Fixed socket, cable collet, nut fixing and nut for fitting a bend relief 1) Panel cut-out (page 15) Note: 1) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see pages 141 and 142 of the unipole/multipole catalog). Free socket with cable collet Free socket with oversize cable collet 1) Note: 1) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 13).

Free socket, cable collet and nut for fitting a bend relief 1) Note: 1) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see pages 141 and 142 of the unipole/ multipole catalog).

Insert configuration Unipole Solder contacts Note: 1) see calculation method, caution and suggested standard. 2) also available with inversed contacts: plug = female, socket = male. l First choice alternative l Special order alternative Coaxial, Triaxial, Hybrid A wide choice of those types is available, please consult us.

Multipole Contact type Print (straight) Print (elbow) Solder contacts Crimp contacts Note: 1) see calculation method, caution and suggested standard. 2) lowest measured value; contact to contact or contact to shell. 3) rated current = 6A for socket with elbow (90°) contacts for printed circuit. 4) rated current = 12A for socket with elbow (90

Multipole Contact type Print (straight) Print (elbow) Solder contacts Crimp contacts Note: 1) see calculation method, caution and suggested standard. 2) lowest measured value; contact to contact or contact to shell. 3) rated current = 6A for socket with elbow (90°) contacts for printed circu

Multipole Contact type Print (straight) Print (elbow) Solder contacts Crimp Crimp contacts Note: 1) see calculation method, caution and suggested standard. 2) lowest measured value; contact to contact or contact to shell. l First choice alte

Multipole Contact type Print (straight) Print (elbow) Solder contacts Crimp contacts Note: 1) see calculation method, caution and suggested standard. 2) lowest measured value; contact to contact or contact to shell.

Multipole Contact type Print (straight) Solder contacts Print (elbow) Crimp Crimp contacts Note: 1) see calculation method, caution and suggested standard. 2) lowest measured value; contact to contact or contact to sh

Collets C and K type collets Reference Type Code Type Code Note: All dimensions are in millimetres. 1) the inner diameter of the smallest bend relief available is 2.5 mm (

Reference Type Code Type Code

Variant Bend relief for models with collet Note: The bend relief must be ordered separately (see pages 141 and 142 of the unipole/multipole catalog). All dimensions are in millimetres. Panel cut-outs Panel Cut-outs EVP, PSN L Mounting nuts torque Component

Plug caps (IP68 and resistance to hydrostatic pressure 30 bars) Part number sliding loop Note: 1) the tolerance on this dimension is ± 5 mm. l Body material: l = N, nickel-plated brass (Ni 3µm) l = S, stainless steel l Lanyard material: Stainless steel l Crimp ferrule material: Nickel-plated brass Blanking caps for fixed sockets (This cap is only IP68 when installed) Part number S1 Note: 1) the tolerance on this dimension is ± 5 mm. l Body material: l = N, nickel-plated brass (Ni 3µm) l = S, stainless steel l Lanyard material: Stainless steel l Crimp ferrule material: Nickel-plated brass l O-ring:...