TELEMANIPULATOR CONNECTORS N SERIES

Precision modular connectors to suit your application Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than 80 countries with the help of over 40 subsidiaries and distributors. Over 75000 connectors The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of handling cable diameters up to 30 mm and for up to 114 contacts. This vast portfolio enables you to select...

N Series A range of remote handling stainless steel connectors suitable for operating in harsh environments such as nuclear reprocessing cells and the chemical industry. Features include alignment system and connection identification for ease of use. The N series are non-shielded connectors, one of the connector pin can be used as shield ground. Feature / Benefits: – Self-latching connection system based on K series – Easy handling and gripping with highly efficient pre-positioning – Reduced mating and unmating forces – Black visual indicator on plug and socket shell – Cable clamp on all plugs...

Part Section Showing Internal Components 3 shell retaining ring insulator female contact O-ring insulator male contact earthing cone gasket washer Straight plug clamp clamp nut 9 hexagonal cap screw 10 clips 11 aligned pin 12 center piece shell latch sleeve inner shell front retaining ring O-ring cable clamp body Shell material and Treatment Components Surface treatment (µm) Material (Standard) Nickel-plated Cu Ni Outer shell, collet clamp, pre-positioning sleeve, washer without treatment Latch sleeve Special stainless steel without treatment Earthing crown without treatment Stainless steel without...

Part Numbering System Plug F Z G. 3 N . 3 0 6 . T L L Y 9 0 Y Variant: (page 26) Cable ø: (page 25) Collet type: (page 25) Y = Bend relief clamps Fixed socket Model: (page 6) Series: (page 6) Insert configuration: (page 16) Housing: T = stainless steel Contact: (page 24) A = male solder L = female solder C = male crimp M = female crimp Insulator: PEEK (page 24) L = for solder contact Y = for crimp contact FZG.3N.306.TLLY90Y = straight plug, 3N series, multipole type with 6 contacts, outer shell in stainless steel, PEEK insulator, female solder contacts, Y type collet for 9.0 mm diameter cable....

Metal housing models Technical Characteristics Mechanical and Climatical Value Temperature range 2) Resistance to vibrations 1) 2) Shock resistance Salt spray corrosion test Protection index (mated) Climatical category in order to perform correctly and withstand the pressure, cable assembly shall be made according to instruction we recommand. vacuumtight version: -20°C, + 80°C. FZG Straight plug with positioning pin, cable clamp and smooth handling surface ~L ~M ~N FZY Straight plug with positioning pin, cable clamp and smooth handling surface ~L ~M

FHG Elbow plug (90°) with positioning pin, cable clamp and rough handling surface L D FMG Elbow plug (120°) with positioning pin, cable clamp and rough handling surface ~L L1 D

FMY Elbow plug (120°) with positioning pin, cable clamp and rough handling surface ~L L1 FDG Straight plug with positioning pin, cable clamp and smooth handling surface ~L FDY Straight plug with positioning pin, cable clamp and smooth handling surface ~L Part number example: FDY.4N.3ll.TLlCll www.

EDG Fixed socket with square flange, 4 screws fixing, with long pre-positioning sleeve. Without earthing crown P3 Panel cut-out (page 27) EDY Fixed socket for remote handling with square flange and lever P3 Panel cut-out (page 27

HSG Fixed socket, with long pre-positioning sleeve, without earthing crown, watertight or vacuumtight Reference Model P1 Panel cut-out (page 27) HSY Fixed socket for remote handling with lever, watertight or vacuumtight Reference Model P1 Panel cut-out (page 27)

ASG Fixed adaptor to K series (the K side is equipped with female contacts, the N side with male ones) P1 Panel cut-out (page 27) Note: 1) delivered with a round nut (GEB.5E.240.AZ). ASY Fixed adaptor to K series (the K side is equipped with female contacts, the N side with male ones) P1 Panel cut-out (page 27) Note: 1) delivered with a round nut (GEB.5E.240.AZ).

AJG Fixed adaptor to K series, vacuumtight (interchangeable insulator) (the K side is equipped with female contacts, the N side with male ones) P2 Panel cut-out (page 27) AJY Fixed adaptor to K series, vacuumtight with lever (interchangeable insulator) (the K side is equipped with female contacts, the N side with male ones) P2 Panel cut-out (page 27)

PBG Fixed socket with square flange, 4 screws fixing, with long pre-positioning sleeve and cable clamp. Without earthing crown P3 Panel cut-out (page 27)

Part number Part number

Keyed models FZU Straight plug with positioning pin and coding pins, cable clamp and rough handling surface, with lanyard release ~L ~M øB Note: Please contact the factory for other cable clamps. EDU Fixed socket with square flange with coding pins, 4 screws fixing N D P4 Panel cut-out (page 27

Insert configuration Multipole Solder contacts Contact type Solder contact Test voltage (kV rms)2) Contact-shell Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)2) Contact-shell Test voltage (kV rms)1) Contact-contact Print (elbow) Print (straight) Crimp contacts Crimp contact see calculation method, caution and suggested standard. test voltage (kV) contact-shell (values here are for B

Multipole Solder contacts Contact type Solder contact Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)2) Contact-shell Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)2) Contact-shell Crimp contacts Print (elbow) Print (straight) Crimp contact see calculation method, caution and suggested standard. test voltage (kV) contact-shell (values here are