Catalogs >
LEMO >
T SERIES

T SERIES
32Pages

Catalog excerpts

T SERIES IP 68 PUSH-PULL CONNECTORS

Precision modular connectors to suit your application Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than 80 countries with the help of over 40 subsidiaries and distributors. Over 90000 connectors The modular design of the LEMO range provides over 90000 connectors from miniature ø 3 mm to ø 50 mm, capable of handling cable diameters up to 30 mm and for up to 114 contacts. This vast portfolio enables you to...

Open the catalog to page 2

T series T series connectors have been specifically designed for outdoor applications. They include an inner sleeve and seals to prevent penetration of solids or liquids.This series is watertight when mated to give a protection index of IP68 as per IEC 60529 standard and have the following main features: - IP68 mated - Compatible with existing B sockets - Push-Pull self-latching system - Same mounting hole as B sockets - Mechanical key (FGG) with multiple keys - Black-chrome plated brass and plastic outershell available to avoid cross-mating - Multipole types 2 to 32 contacts - High packing...

Open the catalog to page 3

Part Numbering System Plug and free socket F G G. 1 T . 3 0 6 . C L A C 4 0 Z Variant Cable ø (page 13) Collet type (page 13) Contact: A = male solder L = female solder C = male crimp M = female crimp Series Insert configuration (page 10) Housing: C = Chrome plated brass K = Black Chrome plated brass B = POM (black) Insulator: PEEK L = for solder contact Y = for crimp contact FGG.1T.306.CLAC40Z = Straight plug with key (G) and cable collet for bend relief, 1T series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for...

Open the catalog to page 4

Chrome-plated housing models Technical Characteristics Electrical Contacts Material Contact type Male contact Female contact Characteristics Shielding efficiency Note: the various tests have been carried out with FGG and EGG connector pairs, with chrome-plated brass shell and PEEK insulator. Characteristics Endurance IEC 60512-5 test 9a Outershell and collet nut Surface treatment Latch sleeve/earthing crown Shock resistance Other metallic components Salt spray corrosion test 5) Protection index Latching retention Climatical category Note: Note: 6) surface not conductive use socket with...

Open the catalog to page 5

FGG Straight plug, cable collet and nut for fitting a bend relief 1) Note: 1) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page 19). Straight plug, non latching, cable collet FSG Adjustable right angle plug

Open the catalog to page 6

PHG Free socket, cable collet PHG Free socket, cable collet and oversize cable collet 1) Note: 1) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 13). PHG Free socket, cable collet and nut for fitting a bend relief 1) Note: 1) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page 19).

Open the catalog to page 7

EGG Fixed socket, nut fixing Dimensions (mm) Note: 1) maximum length with crimp contacts. Fixed socket, nut fixing (back panel mounting) Dimensions (mm) Note: 1) maximum length with crimp contacts. Panel cut-out Reference Panel cut-out Metal shell Plastic shell L lG Fixed socket, nut fixing, key (G) or keys (A…L) Reference Note: Only available with solder or crimp contacts. LEG model is with LED flange, LNG model is with narrow LED flange and LMG model is with single standby LED flange.

Open the catalog to page 8

Watertight or vacuumtight models These models are identified by a letter «P» at the end of the reference. Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end of the part number (certificate on request). Epoxy resin is used to seal these models. The temperature range is -20°C / +80°C. Part Number Example HGG.0T.305.CLLP (5 contacts, resin potted) HGG.0T.305.CLLPV (5 contacts, resin potted and vacuumtight tested) HGG Fixed socket, nut fixing, watertight or vacuumtight HEG Fixed socket, nut fixing, watertight or...

Open the catalog to page 9

Plastic housing models FGG Straight plug, cable collet and nut for fitting a bend relief, POM outer shell EGG Fixed socket, nut fixing, POM outer shell Note: 1) maximum length with crimp contacts. Panel cut-out Panel cut-out

Open the catalog to page 10

Contact type Plug

Open the catalog to page 11

Insert configurations Multipole Solder contacts Contact type Solder contact Test voltage (kV DC) Contact-shell Test voltage (kV DC) Contact-contact Print (elbow) Print (straight) Crimp contacts available only for connectors fitted with male contacts. l First choice alternative l Special order alternat

Open the catalog to page 12

Multipole Solder contacts Contact type Solder contact Test voltage (kV DC) Contact-shell Test voltage (kV DC) Contact-contact Crimp contacts Print (elbow) Print (straight)

Open the catalog to page 13

Multipole Solder contacts Contact type Solder contact Test voltage (kV DC) Contact-contact Test voltage (kV DC) Contact-shell Crimp contacts Print (elbow) Print (straight) available only for connectors fitted with male contacts. l First choice alternative l Special order altern

Open the catalog to page 14

Collets K type oversize cable collet Note: all dimensions are in millimetres. 1) the inner diameter of the smallest bend relief available is 2.5 mm (in TPU) / 1.7 mm (in silicone). 2) for 1B bend relief. 3) for 2B bend relief. 4) for 3B bend relief. 5) the inner diameter of the largest bend relief available is 14.5 mm.

Open the catalog to page 15

Spare parts for crimp contacts Male contact Female contact Contact part number Insulator part number Types for 309 type the insulator part number is FGG.3B.309.ML (male contact) and EGG.3B.409.ML (female contact). www

Open the catalog to page 16

Tools for crimp contacts Positioners part number Types Female contact Extractors part number for male/ female contacts FGG-EGG Crimp contacts øA Note: a wide variation of strand number and diameter combinations are quoted as being AWG, some of which do not have a large enough cross section to guarantee a crimp as per either MIL-C-22520/1-01 or /7-01. FGG-EGG Insulators Note: each insulator can be used both for crimp contacts of normal shape (fig. 1) or with reduced solder cups (fig. 2). These positioners are suitable for use with both manual and pneumatic crimping tools according to the...

Open the catalog to page 17