PLASTIC CONNECTORS

Precision modular connectors to suit your application Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than 80 countries with the help of over 40 subsidiaries and distributors. Over 5000 REDEL connectors The modular design of the REDEL range provides over 5000 connectors from ø 14 mm to ø 21 mm, capable of handling cable diameters up to 9.5 mm and up to 32 contacts. This vast portfolio enables you to select the...

Exploded view of the REDEL SP Straight plug cable collet Straight plug with bend relief bend relief backnut for a bend relief cable collet Fixed socket Free socket cable collet

SP Series The REDEL SP connectors are plastic Push-Pull connectors. These circular plastic connectors are especially adapted for applications such as medical electronics and test & measurement. The SP series offer additional features: the latch sleeve is recessed into the connector body ensuring greater shock resistance of the product. The complete connector can be assembled from spare parts (even the contact configuration) therefore offering good flexibility in stock keeping. The outer shell in Proprietary sulfone enables extensive sterilisation cycles of the product. A large choice of bend...

Part numbering system Variant Z = cable collet and nut for fitting a bend relief Collet nut colour table: (page 7) G = grey A = blue J = yellow Keying: (page 6) Contact configuration (page 6) Collet: 3 = (cable ø 2.5 mm - 3.9 mm) 5 = (cable ø 4.0 mm - 5.2 mm) 6 = (cable ø 5.3 mm - 6.5 mm) 7 = (cable ø 6.6 mm - 7.5 mm) Number of contacts: (page 6) Outershell colour: G = grey N = black B = white Contact type: (page 7) A = male to solder C = male to crimp Free socket N = black R = red V = green B = white L = female to solder 1) M = female to crimp 1) Variant Z = cable collet and nut for fitting...

Fixed socket 1 Outershell Straight plug Average retention force when pulling on the cable 1N = 0.102 kg Cable retention force (depends on cable construction) 1N = 0.102 kg Characteristics Endurance (latching) Working temperature range (Proprietary sulfone) Protection index (mated) Straight plug, key (N) or keys (P, S and T), with cable collet Part Number SAN.M••.GLA.3G SAN.M••.GLA.5G SAN.M••.GLA.6G SAN.M••.GLA.7G Note: replace •.• by contact configuration (see page 6). Straight plug, key (N) or keys (P, S and T), with cable collet and nut for fitting a bend relief Part Number SAN.M••.GLA.3GZ...

Fixed socket, key (N) or keys (P, S and T) with two nuts (back panel mounting) a Part Number Fixed socket, key (N) or keys (P, S and T) with two nuts (back panel mounting) and with straight print contact 4.1 Part Number Note: replace •.• by contact configuration (see page 6). Contact Solder Crimp a max (mm) a (mm) Note: replace •.• by contact configuration (see page 6). Fixed socket, key (N) or key (P) with two nuts (back panel mounting) and with elbow print contact 13 Part Number Note: replace •.• by contact configuration (see page 6). Free socket, key (N) or keys (P, S and T), with cable collet...

Verify the third digit of the part number in order to select the right keying. The standard keying is «N» coded. 00 female male female male Keying (plug front view) Reference Contact type for plug Contact type for socket male female male female Insert configuration Male solder contacts Contact type Print (elbow) Test voltage (kV rms)1) Contact-contact Air clearance min 2) (mm) Creepage distance min 3) (mm) Test voltage (kV rms)1) Contact-contact Air clearance min 2) (mm) Creepage distance min 3) (mm) Solder / Crimp / Print (straight) Female crimp contacts Male crimp contacts Female solder contacts...

Outer shell material Proprietary sulfone Grey Black White Note: adapted for sterilisation satured steam (120°C or 134°C). Contact type Select the type of contact: solder or crimp? When should I use crimp rather than solder contacts ? Type solder crimp Soldering • recommended for small volumes • requires little amount of tooling (soldering iron) • requires more time Type solder crimp print print 90° Crimping • recommended for large volumes • no heat is required to make the connection • for contacts with high density • for use in high temperature environment (max. 170°C) • requires extra tooling...

Insulator and male or female crimp contacts Contact nb. of configuration contacts male / black marking female / black marking Insulator with male or female solder contacts Contact nb. of configuration contacts male / black marking female / black marking Plug outershell kit (no contacts) Part Number ~36 grey SA•.100.GZZ white SA•.100.BZZ black SA•.100.NZZ Note: replace • by alignment key (N, P, S or T). Free socket outershell kit (no contacts) Part Number ~35 grey SR•.200.RG white SR•.200.RB black SR•.200.RN Note: replace • by alignment key (N, P, S or T). Socket outershell kit (nut fixing), (no...

SKl.200.lZZl Socket outershell kit (with two nuts), (no contacts) Part Number grey SK•.200.GZZG white SK•.200.BZZB black SK•.200.NZZN Note: replace • by alignment key (N, P, S or T). Collet Part Number Nut for fitting a GMA.1B bend relief Part Number grey white red black blue Part Number grey white red black yellow blue green Part Number Note: only for SA•, SR• models. Note: only for SA•, SR• models. Colours grey

Plastic front nut for SKl models Part Number grey white red black yellow blue green Bend relief A bend relief absorbs the angular force that may be exerted on cables. These are designed for plugs and free sockets with cable collet and nut. The Colours of these bend reliefs are not identical to the RAL coulours of the socket’s front nut. øA Dimensions (mm) Bend relief Cable ø A L max. min. 2.5 3.0 3.5 4.0 4.5 5.1 5.7 6.3 Temperature range in dry atmosphere Note: The last letter «G» of the part number indicates a grey colour, see the adjacent table and replace letter «G» by the letter of the colour...