Plastic Connectors XP Series - 20 Pages

Add to MyDirectIndustry favorites
Plastic Connectors XP Series

Catalog excerpts

Precision modular connectors to suit your application Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than 80 countries with the help of over 40 subsidiaries and distributors. Over 5'000 REDEL connectors The modular design of the REDEL range provides over 5'000 connectors from o 14 mm to o 21 mm, capable of handling cable This vast portfolio enables you to select the ideal connector configuration to suit...

 Open the catalog to page 2

y Exploded view of the REPEL XP Straight plug cable collet Straight plug with bend relief bend relief cable collet Fixed socket ' insulator + contacts 1—• shell Free socket cable collet

 Open the catalog to page 3

XP Series The REDEL XP connectors are plastic Push-Pull connectors. These circular plastic connectors are especially adapted for applications such as medical electronics and test & measurement. The XP series offer additional features: the latch sleeve is recessed into the connector body ensuring greater shock resistance of the product. The complete connector can be assembled from spare parts (even the contact configuration) therefore offering good flexibility in stock keeping. The outer shell in Proprietary sulfone enables extensive sterilisation cycles of the product. A large choice of...

 Open the catalog to page 4

Contact configuration (page 6) Number of contacts: (page 6) ■ Outershell colour: G = grey for fitting a bend relief -• Collet nut colour table: (page 7) Contact type: (page 7) Free socket Contact configuration (page 6) Number of contacts: (page 6) ■ Outershell colour: G = grey for fitting a bend relief Collet nut colour table: (page 7) Contact type: (page 7) Fixed socket Contact configuration (page 6) Number of contacts: (page 6) Outershell colour: G = grey Front nut colour table: (page 7) Contact type: (page 7) A = male to solder1) C = male to crimp 1) D = male to print1) L = female to...

 Open the catalog to page 5

Fixed socket Straight plug XAN Straight plug, key (N) or keys (P, S and T), with cable collet Note: replace •.• by contact configuration (see page 6). XAN Straight plug, key (N) or keys (P, S and T), with cable collet and nut for fitting a bend relief Note: replace •.• by contact configuration (see page 6). The bend relief must be ordered separately (see page 10). XLN Fixed socket, key (N) or keys (P, S and T), nut fixing Note: replace •.• by contact configuration (see page 6). Note: all dimensions are in millimeters.

 Open the catalog to page 6

XKN Fixed socket, key (N) or keys (P, S and T) with two nuts (back panel mounting) Note: replace •.• by contact configuration (see page 6). XKN Fixed socket, key (N) or keys (P, S and T) with two nuts (back panel mounting) and with straight print contact Part Number Note: replace •.• by contact configuration (see page 6). XRN Free socket, key (N) or keys (P, S and T), with cable collet Note: replace •.• by contact configuration (see page 6). XRN Free socket, key (N) or keys (P, S and T), with cable collet and nut for fitting a bend relief Note: replace •■• by contact configuration (see page...

 Open the catalog to page 7

Verify the third digit of the part number in order to select the right keying. The standard keying is «N» coded. Keying (plug front view) Contact type for plug Contact type for socket Insert configuration Male solder contacts Male crimp contacts Female solder contacts Female crimp contacts Note: 1)depending on specific application and related standard, more restrictive operating voltage may apply. We suggest operating voltage = 1/3 test voltage, see page 15. 2) shortest distance in air between two conductive parts. 3) shortest distance along the surface of the insulating material between...

 Open the catalog to page 8

Outer shell material Note: adapted for sterilisation satured steam (120°C or 134°C). Select the type of contact: solder or crimp? Note: 1) only for S or T keying. When should I use crimp rather than solder contacts ? • recommended for small volumes • requires little amount of tooling (soldering iron) • requires more time • recommended for large volumes • no heat is required to make the connection • for contacts with high density • for use in high temperature environment (max. 170°C) • requires extra tooling (crimping tools) Note: the RAL colours are indicative and depend on raw material and...

 Open the catalog to page 9

XAN / XLN Insulator and male or female crimp contacts XAN / XLN Insulator with male or female solder contacts XA«.100.«ZZ Plug outershell kit (no contacts) Note: replace • by alignment key (N, P, S or T). XR«.200.«« Free socket outershell kit (no contacts) Note: replace • by alignment key (N, P, S or T). XL*.200.*ZZ* Socket outershell kit (nut fixing), (no contacts) Note: replace • by alignment key (N, P, S or T).

 Open the catalog to page 10

XK*.200.*ZZ* Socket outershell kit (with two nuts), (no contacts) Note: replace • by alignment key (N, P, S or J). XAM.130.** Nut for fitting a GMA.1 B bend relief Note: only for XA», XR» models. Note: all dimensions are In millimeters. XLN Plastic front nut for XL« models

 Open the catalog to page 11

XKN Plastic front nut for XK« models A bend relief absorbs the angular force that may be exerted on These are designed for plugs and free sockets with cable col- The Colours of these bend reliefs are not identical to the RAL coulours of the socket's front nut. Note: the selection of pigments, which should remain stable at high temperature, is limited by the new regulations. For this reason, some colours will be a shade different from those used for Desmopan bend reliefs. The selected solutions represent the best pos- sible compromise. Note: the last letter «G» of the part number indicates a...

 Open the catalog to page 12

Spanners with notch for securing Material: Black polyamide. For notched nut XLN.240.RG. Material: Black polyamide XOE Positioners for crimp contacts DCF Automatic extraction tools for crimp contacts Note: the variance In conductor stranding diameter for the minimum AWG Is such that some can have a cross section which Is not sufficient to guarantee crimping as per 1) With this extractor, the user must remove the Insulator from the outer shell.

 Open the catalog to page 13

All LEMO catalogs and technical brochures

  1. C1 SeRieS

    4 Pages

  2. Serbal 3G

    2 Pages

  3. HD Z-LINK

    2 Pages

  4. 0A Series

    2 Pages

  5. Coax triax mixed

    36 Pages

  6. Elbow plugs

    4 Pages

  7. Coaxial 3GHz

    2 Pages

Archived catalogs

  1. AUDIO VIDEO

    38 Pages

  2. Thermocouple

    52 Pages