RF applications connectors Specially designed for RF applications up to 10 GHz, the C1 Series offers various connector models combining quality, ruggedness and safety. Small size, and ease of use guaranteed by LEMO's Push-Pull self-latching system, allows sockets to be mounted at a high density in a limited space.

LEnm Electrical Technical CharacteristicsMechanical and Climatical Characteristics Note: depending on cable design. Voltage Standing Wave Ratio The VSWR (Voltage Standing Wave Ratio) is the value representing the power reflected in a connection. The VSWR varies with frequency, in most cases, the working frequency range is where VSWR is < 1.25. Note: value measured with a RG-142 B/U cable. RAA Straight plug, for cable crimping Part number M1 Cable assembly (page 4) RAL elbow plug (90°) for cable crimping Part number RJA Free socket for cable crimping Part number

RJE Fixed socket, two nuts and flange for cable crimping (back panel mounting) Part number P2 Panel cut-out (page 4) M1 Cable assembly (page 4) RVA Adaptor from LEMO plug to SMA plug Housing: N = Nickel-plated brass Contact type: A = male solder M = female solder F, T = adaptor

Note: The tolerances on these dimensions are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm. LEMO HEADQUARTERS SWITZERLAND LEMO SA Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: [email protected] © LEMO / Data subject to change, printed in Switzerland, May 2017, Updated June 2018