PRE-TERMINATED F2 FIBRE OPTIC CONTACT Pre-terminated F2 fibre optic contacts offering a quick and easy field solution The pre-terminated contact provides the user with a contact that can be terminated without the use of epoxy, or polishing. The F2 pre-terminated fibre optic contact is designed as a repair solution. It is intended for use in situations where it is critical that a cable be repaired quickly. The pre-terminated contacts enable simple and rapid on-site-terminations for SMPTE-311M cables. The design eliminates the need of polishing fibre-optic elements as well as preparing and using special epoxies for the fibre assembly. The F2 pre-terminated contact is entirely compatible with, and is designed for use with, the LEMO 3K.93C Series. It also fits into any connector where the standard LEMO F2 contact is used.

E-Emn The F2 pre-terminated contact is designed for fitting into single 0K series, multifibre connectors or mixed optical /electrical connectors from 2B to 5B, 2K to 5K Series. Its main features are: - easy and fast assembly - no need for costly and bulky equipment - no polishing - no epoxy - simple cleaning process - easy identification with black PEEK Technical Characteristics Optical Part Section Showing Internal Components Characteristics Female contact (l) body with holder (2) ferrule with holder (3) spring (4) crimping tube (5) retention clip ^ alignment tube with support Male contact...

Part Number Note: 1) These positioners are suitable for use with both manual and pneumatic crimping tools according to the MIL-C-22520/7-01 standard. 2) These turrets can be used with manual crimping tool according to MIL-C-22520/1-01 standard. Power contacts are special with an oversized crimp barrel. 3) For specific use with the pre-terminated contacts FFTF2.BA2.LCE10 or PST.F2.BA2.LCE10. Maintenance toolsDCS.91.F23.LA Cleaning tool F2 contactWST.KI.125.34 Cleaning kit F2 contact Used for maintenance cleaning. The tool is made with a sponge alcohol reservoir (supplied empty). 16 dry cotton...

LEnm •UW Parts for field repair with pre-terminated F2 contact Overview of pre-terminated F2 assembly instructions The pre-terminated F2 contact is designed for termination on 0 9.2 mm or 0 16 mm cable containing 900 pm buffered fibres. 1) Remove the cable outer jacket, fold back the earthing braid along the cable, ensure that the electrical conductors are folded back along the cable. Do not to fold back the blue and yellow optical fibres. 2) Remove the fibre strain jacket. Remove the remaining buffer coating and finally remove the primary coating using the primary coat stripper (WST.PN.102.3CR). Clean...