Catalogs >
LEMO >
ANGLED-PC F8 FIBRE OPTIC CONTACT

ANGLED-PC F8 FIBRE OPTIC CONTACT
4Pages

Catalog excerpts

ANGLED-PC F8 FIBRE OPTIC CONTACT Angled Physical Contact F8 fibre optic contacts - offering a high quality solution The F8 fibre optic contact is an APC (angle physical contact) that provides lower insertion loss and a very low back reflection. The ferrule’s endface is polished to an 8° angle and offers an improved performance at the fibre/fibre interface. The exact alignment of the fibre is ensure by a precision alignment mechanism. The F8 contact is a great solution for applications such as communication, broadcast or test & measurement. It fulfils the IEC 61753-1 part 1 standard regarding fibre optic contact performance under service environment.

Open the catalog to page 1

The angled-PC F8 fibre optic contact is designed to fit into LEMO 2K and 3K Series connectors. These connectors are capable of handling cable diameters from 3.6 mm to 9.0 mm. Angled-PC F8 contact's main features are: – low insertion loss – high return loss – high stability over repeated matings – easy cleaning of the contacts – green colour identification – precision positioning guide – single mode fibre Technical Characteristics Characteristics Mating durability Damp heat steady state High temperature Low temperature Cable retention Average insertion loss fibre 9/125 µm Return loss fibre...

Open the catalog to page 2

Connectors for F8 fibre optic contact FGG Straight plug, key (G) or keys (A...F, L and R), cable adaptor and nut for fitting a bend relief Note: The bend relief must be ordered separately. Two male fibre optic contacts FFS.F8.125.LCE30 (125µm) must be ordered separately EGG Fixed socket, nut fixing, key (G) or keys (A…F, L and R) Note: The bend relief must be ordered separately. Two female fibre optic contacts PSS.F8.125.LCE30 (125µm) must be ordered separately PHG Free socket, key (G) or keys (A…F, L and R), cable adapter and nut for fitting a bend relief Note: The bend relief must be...

Open the catalog to page 3

Alignment device for F8 fibre optic contact Part Number PSS.F8.290.NZZ Note: Alignment device should be ordered as replacement item. Tools DCS Polishing plate Part Number Polishing machine Seiko Type Maintenance tools DCS.F2.035.PN Alignment device tool Simple tool with two threaded end for installation/ extraction of the F8 contact alignment device. (dimensions of the tool are the same as for the F2 contact). For use with WST.KI.125.34 cleaning kit. Fibre optic cleaning kit of 2 cotton buds, 1 dry and 1 being soaked in IPA (Isopropyl Alcohol) used for cleaning the fibre optic contacts....

Open the catalog to page 4