MULTI-POINT DENSITY METER

Measuring range: Density Standard Supported measuring units Real density: g/cm3, kg/m3, lb/gal, lb/ft3; API; SG Alcohol tables Spot density/concentration up to 6 points Spot Temperature up to 6 points Continuous measurements High accuracy Ambient temperature Weather rating IP68 for sensor and IP65 for other parts Power voltage: Implosion protection marking Digital output Standard: RS485, Modbus; user choice of signals and protocols Temperature compensation Viscosity compensation Factory calibration Calibration certificates supplied as standard Simple installation Suitable for very viscous liquids...

The MDM-46 measuring principle allows accurate direct measurement of the density of the liquid with capability of automatic compensation for liquid's viscosity. This allows MDM-46 density meterto achieve the ultimate precision of measurement. The MDM-46 sensing element is a specially designed streamlined resonant tube, which is washed on the both sides by measuring liquid. The tube is excited and oscillated at resonant frequency. The oscillation period of the vibrating tube and its frequency characteristics depend on parameters of the measured liquid as its density and viscosity. An integral...

MDM-46 is a 2" pipe (assembled by sections) that is lowered into the tank to the bottom, through a 3" or larger flange opening. The MDM-46 does not require a stilling well or stand pipe, it can be installed free standing in a cone roof tank. It is a single instrument, thus it requires only one electrical connection (Not multiple tank openings and electrical connections as with other level or level hybrid systems). Spool section for mounting the MDM-46 on the other half of a 3" or 4" flange face. You do not need to pivot the gauge or lift it out of the gauge pipe temporarily to take a manual gauge...