1. Catalogs
  2. LEMIS Baltic
  3. DC-40 Process In-Tank Density Meter

DC-40 Process In-Tank Density Meter
1 /4Pages

DC-40  Process In-Tank Density Meter

DC-40 Process In-Tank Density Meter
1 /4Pages

Catalog excerpts

DC-40  Process In-Tank Density Meter-3

Measuring range: Density Standard calibration Supported measuring units Real Density: g/cm3, kg/m3, lb/gal, lb/ft3; API; SG Alcohol tables Temperature compensation Viscosity compensation Maximum Pressure Installation types: Direct insertion Long rigid immersion Process Connections Large selection of flanges available Ambient temperature Weather rating Other Wetted Parts Electronics Housing Stainless steel SS 316 L; NiSpan C; Hastelloy C22;Teflon Stainless steel SS316 L or Hastelloy C22 Aluminum, blue epoxy finish Electrical Connections Screw terminals; Cable entry: 2 x 3/4" NPT Power supply Line...

 Open the catalog to page 3
DC-40  Process In-Tank Density Meter-4

Density, temperature and concentration monitoring in storage tanks Petroleum products, fuels, lubricants, LPG, LNG Concentration of acids or corrosive chemicals Food, Dairy & Beverages Product identification and consistency Concentration and dilution measurements Monitoring of end reaction in reactors In-tank mixing and blending * Continuous, online density monitoring at process conditions • Accurate measurement of density of liquids with viscosity up to 2000 cSt • Rigorous factory calibration and testing of the transducer • Ability to operate in pressurized tanks • Immersion in the tanks up...

 Open the catalog to page 4

All LEMIS Baltic catalogs and technical brochures

  1. DC-60

    2  Pages

  2. OWC 51 SERIES

    2  Pages

  3. VDC-30 SERIES

    2  Pages

  4. DC-41 SERIES

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.