Flooring / Interior Decoration
24Pages

Flooring PLASTIC WELDING Swiss made Flooring and Interior Decoration Everything for welding to the floor

Dear Leister customers Vinyl sheet flooring installers need reliable welding tools, and reliable results are a must as it is not cost effective to test every welded seam. Leister floor tools and automatic welders provide the highest quality repeatable results by supplying constant temperature, pressure, and speed during operation. A floor that is properly welded is critical when it comes to hygienically sensitive surfaces. This is why most floors in public buildings such as hospitals or schools need to be welded properly, as well as in public transportation facilities such as planes,...

The Welding Process Adhesive recommended by the manufacturer is required installing linoleum and rubber. Usually 3 to 5 mm welding rod of the same material, that is recommended by the manufacturer is used for welding PVC or TPU surfaces. Before welding, the seam edges are grooved to approx. 2/3 of the thickness of the surface and then heat seam welded with the welding rod. It is important that the welding rod is fully melted into the milled surface created by the groover. The rod is then trimmed level to the surface in two steps using the Leister quarter-moon knife: In the first stage, the...

Welding – implementation Welding with an automatic welder (UNIFLOOR / MINIFLOOR) Is recommended for time savings and precise / repeatable welded seam results. Constant (high) speed Constant pressure Constant temperatures (UNIFLOOR E / MINIFLOOR with TRIAC AT) Manual welding (TRIAC / HOT JET S / GHIBLI) Recommended for short grooves, repairs, or transitions For a consistent weld quality, the following must be taken into consideration: As constant a speed as possible As constant a pressure as possible Constant temperature (TRIAC AT) Cutting – step 1 The first detachment procedure takes place...

The benefits of Leister at a glance: Robust device components Lower cost of ownership due to maintenance-free brushless drive and blower motors Durable high quality heating elements Corrosion-resistant weights Performance Faster welding speeds and precise repeatable results An automatic welder can also shorten the process by eliminating steps in the process Leister tools with digital settings compensate for power quality issues and eliminate power problems that are typical at industrial locations and construction sites. Service Support and device demonstration by our field service...

Overview Hot-air hand tools 8 Flooring 9 Hot-Air Hand Tools TRIAC ST 10 / 11 TRIAC AT 11 ELECTRON ST 12 / 13 HOT JET S 14 Flooring / Interior Decoration Promotes the life of the floor. 16 / 17 MINIFLOOR Drive Unit 18 UNIFLOOR E / UNIFLOOR S 19 GROOVER 20 GROOVY 21 General accessories Suitable for frequent cleaning.

for welding elastic floor coverings for welding elastic floor coverings for welding elastic floor coverings for welding elastic floor coverings Starting welding parameters manual weld* Linoleum: Approx. 300-400°C Linoleum: Approx. 300-400°C Linoleum: Approx. 300-400°C Linoleum: Approx. 300-400°C PUR/TPU: Approx. 350-400°C PUR/TPU: Approx. 350-400°C PUR/TPU: Approx. 350-400°C PUR/TPU: Approx. 350-400°C PVC: Approx. 350-450°C PVC: Approx. 350-450°C PVC: Approx. 350-450°C PVC: Approx. 350-450°C Open loop Close loop Open loop *The parameters listed are purely reference values (room temperature...

Typ Area of application Groove wide Groove depth Speed Temperature Air flow range Voltage Frequenz Power Weight Size Cable length Startup parameters' Materials Speed Temperature Air flow range Catalog page GROOVY Gouging tool for elastic floor coverings mm 2.5 / 3.5 GROOVER Grooving machine for elastic floor coverings 2.5 / 2.8 / 3.5 / 4.0 0.0 - 4.0 Phase 1 (Linoleum)Phase 2 (PVC, TPU, PU) 4 - 6 8 - 12 MINIFLOOR Drive unit for welding elastic floor coverings 2.5 - 4.0 2.5 - 4.0 0.5 - 4.5 40 - 620 (with TRIAC AT) 20 - 100 (with TRIAC AT) 100 - 230 50 / 60 drive unit with TRIAC AT 5 1605...

TRIAC ST – Design meets experience The new TRIAC ST from Leister is primarily used for welding and plastic fabrication. During its development, a deliberate choice was made to do without extra technical features. Instead it is distinguished by comfort, being reliable versatile and user friendly, like its predecessor the TRIAC S. A prominent feature here is the two-component handle, which is not only attractive, but also gives the user perfect grip. The low weight of less than 1 kg/2.18 lbs ensures a perfect weight balance. Product advantage Ergonomic handling: The 2-component handle and...

The TRIAC AT is an intelligent hot-air hand tool for welding and shrinking plastics that is suitable for on-site use. It is designed for the needs of even the most demanding professional. Every tool undergoes stringent quality checks prior to leaving the factory in Switzerland. This high-quality hot-air hand tool is equipped for all situations. Its universal areas of application are virtually unlimited. The TRIAC AT will continue to prove its merit in any weather condition and is just as effective outside as it is indoors - all during continuous operation. Hot-air hand tool Hot-air hand...

ELECTRON ST – Strong, compact and handy The new ELECTRON ST is a real powerhouse among Leister's hand tools. The appearance of this tool has been modeled after the new TRIAC range. For the user, this means improved ergonomics and, as a result, the ability to work in more comfort. Existing ELECTRON nozzles fit the new model. Product advantages Powerful: Suitable for any application thanks to its outstanding power rating of up to 3400 W. Perfekte Ergonomie: 100 lighter and with a 2-component handle that’s nearly 8 mm slimmer than its predecessor. Infinitely adjustable: Easy air temperature...

Hot-air hand tool Accessories ELECTRON ST 148.933 Protective tube • Suitable for construction sites • Leister's most powerful hand tool • Easy-clean air filter • Carbon stop and heating element protection provide automatic protective measures • Sturdy tool case supplied Technical data Voltage Frequency Power Temperature Air volume (20°C) Dynamic pressure 0 Nozzle holder Emission Size (L x 0) Weight Conformity mark Approval mark Protection class II mm 338 x 90, handle 0 56 kg 1.1 (without power cord) Article No. 145.567 ELECTRON ST, 230 V / 3400 W for push-fit nozzles with Euro plug 149.673...