1000 series
7Pages

Extreme 1000 series multifunctional encoders

1000 series Multifunctional encoders with extreme durability Equipped for extreme environments bearings has been optimized, enabling a dual set of In many applications within metal, mining and bearings with dimensions that are nothing less than marine industries the demands on the equipment is extreme when it comes to encoders. The high encap- exceptional. The machines are subject to exposure sulation level, IP67, protects the inner parts from from mechanical loads, vibrations and shock in an dust and liquids, and as special option the housing environment of dust, liquids and high...

1. Mechanics ■ Pre-mounted stub shaft 0160 mm ■ Pre-mounted stub shaft 0220 mm Euro-flange 0115 mm with solid shaft 011 mm Euro-flange 0115 mm with solid shaft 015 mm 3. Output box B (optional) ■ HCHTL ■ HTL ■ TTL ■ RS422 ■ Dual 2 x HCHTL ■ Dual 2 x HTL ■ Dual 2 x TTL ■ Dual 2 x RS422 ■ SSi 25 bit ■ EnDat 25 bit ■ PR0FIBUS 25 bit ■ Parallel 13 bit ■ CRG Overspeed ■ Base plate for footmounting 4. Resolution (incremental) ■ 1024, 2048, 2500, 3072, 4096, 5000, 8192, 10000 ppr. other pulse rates available upon request 5.Cover ■ side mounted box (cable gland pointing downwards) Anodized...

Mechanics – solutions for mechanical mounting Stub shaft Ø160 mm Three encoder outputs, two side-mounted boxes. Pre-mounted stub shaft with insulation. Delivered with sturdy torque bracket, insulated torque arm and accessory screws for fixing of the shaft. This is a general overview of available mechanical options. Combine your own mechanical solution by selecting your preferred option for each module! Euro-flange Ø115 mm Ø11 or Ø15 mm solid shaft with key nut, PROFIBUS output, top-mounted box. Base plate for foot-mounting. Industry standard flange B10. Optional mounting with accessory base...

SSI 25 bit SSI or Synchronous Serial Interface is a digital point-to-point interface. It provides unidirectional communication at speeds up to 1 MHz by the use of only four wires. The SSI interface is available with 25 bit resolution, corresponding to 8192 unique positions singleturn and 4096 revolutions multiturn. – electrical output interfaces EnDat 25 bit Encoder output signals are available in a variety of different interfaces. Consult page 4-5 for possible combinations and put together your own encoder with up to four separate outputs. The EnDat interface is a digital bidirectional...

| Technical data Operating temperature ingress protection class [IEC 60529] Vibration [IEc 6006826] shock [IEc 60068227] Max shaft loads (axial/radial) Cover material shaft material SWEDEN / HEAD OFFICE Address Leine & Linde AB Box 8 SE-645 21 Strangnas Visiting address Olivehallsvagen 8 E-mail info@leinelinde.com website www.leinelinde.com * optional: -40..+70 °C standard for interface HCHTL, ssi, parallel, PRoFIBus, CRG overspeed -20..+100 °C standard for interface HTL, TTL, RS422, EnDat ** Based on variant with 015 mm shaft *** Stainless steel upon request **** Based on variant with one...

The best encoders are those you never have to think about. Those that simply do their job – year after year. Leine & Linde develops and manufactures customised encoder solutions for demanding environments, advanced measuring systems for accurate feedback of speed and positi