eica MICROSYSTEMS MEETING THE CHALLENGES OF EM SAMPLE PREPARATIONTHE LEICA NANOTECHNOLOGY PRODUCT PORTFOLIO The highly comprehensive product portfolio for preparation of biological, medical, and industrial samples.

SAMPLE PREPARATION WITH LEICA MICROSYSTEMS -THE PORTFOLIO THAT GIVES YOU SUCCESS FOR YOUR APPLICATION MECHANICAL PREPARATION CRYO CLEM THUNDER Imager EM Cryo CLEM FREEZE FRACTURING CRITICAL POINT DRYING EM CPD300 Cover images: top: Nematode Eubostrichus dianae with ectosymbiotic bacteria layer, critical point dried with the EM CPD300 (source: Mag. N. Leisch, University of Vienna, Austria); bottom left: Human Erythrocytes and Lymphocytes, critical point dried with the EM CPD300 (source: Dr. W. Muller, University of Utrecht, Netherlands); bottom middle: cross section of abrasive paper, prepared...

THE COMPLETE PORTFOLIO FOR EM SAMPLE TRIMMING & MECHANICAL PREPARATION >> Accurate location and preparation of EM TXP microtargets Target preparation device for milling, sawing, drilling, grinding and polishing >> In-situ stereomicroscope observation samples prior to examination by SEM, >> Automatic process control to produce a mirrorlike surface quality TEM and LM techniques. A perfect system to pre-prepare the sample prior to the ion beam milling techniques. EM RAPID Advanced specimen trimming device for TEM, SEM, LM. EM TRIM2 Specimen trimming device for TEM, SEM, LM. >> 0.5, 1, 10, 100 µm...

EM UC7 Ultramicrotome for ultrathin sectioning of biological and industrial samples. >> Knife usage monitoring >> Feed range from 1 nm up to 15 µm >> Fully motorized knife stage and AutoTrim function >> Vibration decoupled gravity stroke EM FC7 Low temperature ultrathin cryosectioning of biological and industrial samples. Can be mounted on the EM UC7 and the ARTOS 3D. ULTRA MICROTOMY & CRYO-ULTRA MICROTOMY >> Temperature range from +110 °C to -185 °C >> Individual temperature settings of specimen, knife, and gas >> Easy section collection using micromani ulator p and EM CRION ionizer >> EM VCT500...

CRYO PREPARATION EM ICE High pressure system for freezing aqueous samples delivers optimal sample preservation. Offers the highest flexibility to meet multiple application demands. >> Programmable sequential freezing of nine (3 × 3) samples >> Automated LN2 re-filling of the sample storage dewar >> Recovery time between freezing cycles is one minute >> Retrofitable light stimulation and/or electrical stimulation mode EM ICE Light Stimulation (LS) All the features of EM ICE standard, in addition offers fully integrated light stimulation. >> Software integrated programming for LS >> Automatic recondition...

COATING & FREEZE FRACTURING EM ACE200 Desk-top coater for homogeneous coatings of conductive metal or carbon for EM. Fully automated instrument, options include: > Carbon thread evaporation > Sputtering > Both methods with interchangeable heads > Quartz crystal measurement > Planetary rotation > Glow discharge Fully automated, versatile high > vacuum coater produceing very thin, > fine-grained, conductive metal and > carbon coatings. Up to two angled > coating sources configurable. For high > resolution analysis, required for FE-SEM and TEM applications. > Sputtering Carbon thread evaporation...

CONNECT WITH US! Leica Mikrosysteme GmbH ■ Vienna ■ Austria T +43 1 486 8050-0 ■ F +43 1 486 8050-30 www.leica-mlcrosystems.com/em Leica LNT Product Portfolio ■ Engilsh • 01/2020 ■ Copyright © by Leica Mikrosysteme GmbH, Vienna, Austria, 2020. Subject to modifications. LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH.