Monitoring Solutions Leica GM30 Ready for today and tomorrow All-in-one-GNSS monitoring receiver High-end GNSS technology The GM30 is designed for continuous operation and a wide range of monitoring scenarios. It is packed with full feature onboard software including Site Monitor, Leica VADASE, data logging and FTP/SFTP push. With low energy consumption, highly redundant communication capabilities and designed to withstand challenging environment conditions, this rugged receiver is ready for any challenge. Exceeding GNSS signal needs today and tomorrow by supplying 555 GNSS channels, the GM30 monitoring receiver is future-proof, reliably delivering the highest quality results 24/7. With the support of all available and future GNSS signals, and with SmartTrack+ technology, it delivers accurate information on the status of sensitive structures to detect and react, even under the harshest conditions. The GM30 is ready to be customised for any monitoring scenario, from long-term static to dynamic high-frequency monitoring. It is easily combined with a variety of external devices and seamlessly connected with Leica Spider and Leica GeoMoS. In addition, the onboard data logging provides a direct connection with the Leica CrossCheck service.

Leica GM30 GNSS TECHNOLOGY Leica Smart Track+ Very low noise GNSS carrier phase measurements (<0.5 mm rms). Signal acquisition < 30 s1. Industry leading Pulse Aperture Correlator (PAC) multipath mitigation technology for superior quality measurements. Advanced radio frequency power spectrum analysis, automatic interference detection with notification and interference mitigation. 555 universal tracking channels MEASUREMENT PERFORMANCE AND ACCURACY Code differential Site Monitor Reference Station (smoothed) Monitoring (instantaneous) Time for initialisation (typical): VADASE (Velocity and displacement...