Heavy Duty Pipe Cutting and Beveling Machine(Split Frame Clamshell Lathes)

Product catalog summary

Overview: The LEFON Heavy Duty Pipe Cutting and Beveling Machine is a portable device designed for both workshop and on-site use. It is specifically engineered for heavy wall pipes, utilizing a cold cutting principle to avoid heat-affected zones. The machine's aluminum split frame is lightweight, facilitating easy handling and versatile applications.

Applications:

Cutting off pipes
Simultaneous cutting and beveling
Weld preparation on pipe ends
Inside-turning of pipe ends
Flange facing or repairing on-site

Features:

Lightweight aluminum body for easy handling
Quick setup by a single operator
Enhanced stability and gear heat treatment for extended machine life
Suitable for various materials including cast iron, high-strength alloy, and stainless steel
Five models available, covering outer diameters from 2” to 30” and wall thickness up to 6”
Three power sources: Hydraulic Station, Pneumatic, and Electric

Technical Specifications:

Hydraulic Station: 7.4 Hp motor, 170 Nm torque, 1449 psi oil pressure, 4.2 gpm oil flow rate
Pneumatic Motor: 2-3 Hp motor, 149 Nm torque, 1698 L/min air consumption, 90 psi air pressure
Electric Motor: 1020 Watt power, 110/220 Volt, 50/60 Hertz frequency

Design and Operation: The machine features a two-half circular split frame for easy assembly around pipes, suitable for tight spaces. It includes a micro clamping scale for precise beveling and a robust bit holder to ensure perpendicular cutting and beveling.

Certifications: The product is CE Certified, ensuring compliance with European safety standards.

Catalog excerpts

Heavy Duty Pipe Cutting and Beveling Machine(Split Frame Clamshell Lathes)-2

LEFON Heavy Duty Pipe Cutting and Beveling Machine is portable, designed to use in both workshop and on-site. It is heavy duty, specially intended for heavy wall pipes with high wall-thickness in heavy duty applications. It ma- chines pipe by the cold cutting principle that eliminates any heat affected zone. The machine split frame is made from aluminum which is extremely low weight for easy handling and lifting and is versatile in application and can perform many operations. The machine provides a fast metal removal rate and high working speed which presents the economical manufacturing solution....

Open the catalog to page 2

Heavy Duty Pipe Cutting and Beveling Machine(Split Frame Clamshell Lathes)-3

The cutting machine body is aluminum. The light weight body allows one person to easily set up and operate.The machine consists of a two half circular spited frame that can join together at any point around the pipe, making it easy for tight space or field use. Top lifting ring designed for easy field use.Pneumatic motor is 90 degrees relative to the pipe axis, allowing work in tight spaces.Micro clamping scale provides accurate control on beveling progressRobust Bit holder design to ensure cutting and beveling progress is implemented perpendicular to pipe axis even if the pipe is not round,...

Open the catalog to page 3

Heavy Duty Pipe Cutting and Beveling Machine(Split Frame Clamshell Lathes)-4

HYDRAULICSTATION: > 4 | HEAVY DUTY CUTTING AND BEVELING MACHINE | WWW.LEFONMACHINE.COM SPECIFICATIONS: > Model NumberLCB 6LCB 12LCB 18LCB 24LCB 30 Hydraulic motor powerHp(W)--7.47.47.47.4Nm--170170170170Oil working pressurepsi--1449144914491449Oil flow rate min. requiredgpm--4.24.24.24.2 size="-2">

Open the catalog to page 4

All LEFON Machinery catalogs and technical brochures

Archived catalogs

PIPE STAND AND WORKBENCH
3 Pages
Tube Squaring Machine Facing Tool
3 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list