Catalogs >
THE LEE COMPANY >
ZERO LEAK SOLENOID VALVE

ZERO LEAK SOLENOID VALVE
2Pages

Catalog excerpts

PRECISION MICROHYDRAULICS PRODUCT DATA SHEET ■ Zero bubbles per minute leakage of nitrogen ■ Compatible with most petroleum and phosphate-ester based fluids ■ Captive retainer nut (no special tools required) ■ 3500 Lohm restriction (0.3 GPM minimum flow at 3000 psid) ■ 18 - 32 Vdc, 7.8 Watts ■ -65°F to +275°F temperature range ■ Integral safety screen, 0.004 inch hole size ■ 0.25 lbs. maximum weight ■ Endurance tested to 500,000 cycles The Lee Company's new Zero Leak Solenoid Valve extends the sealing performance of our field proven piloting solenoid valves. The valve seat incorporates a polymer seal to achieve zero leakage. In addition, our MultiSeal radically simplifies port layout, offers significant space savings, reduced machining costs and higher reliability than traditional sealing methods. Weighing just 0.25 pounds, the Zero Leak Solenoid Valve is a single coil design that is offered in both normally closed and normally open configurations and with lead wires exiting either end of the valve. The solenoid coil has been optimized to ensure positive pull-in while consuming just 78 Watts at 28 Vdc. Please contact your local Lee Sales Engineer for additional information and technical assistance. Front Wire Exit Valve -MULT I SEAL 0( .094 ) LOCATING PIN PART NUMBER The Lee Company • 2 Pettipaug Road, PO Box 424, Westbrook, Connecticut 06498-0424 Tel: 860-399-6281 • Fax: 860-399-7037 • inquiry@theleeco.com • www.theleeco.com

Open the catalog to page 1

Pressure: 500 - 3000 psid operating 4500 psi proof 6000 psi burst Temperature: -65°F to +275°F Flow Restriction: 3500 Lohms Leakage: Zero bubbles of nitrogen in one minute at Leakage: Zero Current Drain: 0.28 Amps at 28 Vdc and 70°F (7.8 Watts) Weight: 0.25 lbs. maximum Materials: Magnetic path - Nickel plated silicon iron Flow path - Stainless steels and polymer MultiSeal - Polyamide-imide Threaded retainer nut - Anodized aluminum INSTALLATION HOLE - REAR WIRE EXIT VALVE The Lee Company • 2 Pettipaug Road, PO Box 424, Westbrook, Connecticut 06498-0424 Tel: 860-399-6281 • Fax: 860-399-7037...

Open the catalog to page 2