LO-LOHM HIGH DENSITY INTERFACE (HDI) SOLENOID VALVE The Lee Company continues to expand its High Density Interface (HDI) platform by now offering more flow capacity without sacrificing size or weight. Imagine the features of a large valve coupled together with the superior performance of a miniature valve, all in one compact design. Compact Size Light Weight: Less Than 4.5 grams ■ Spike & Hold Voltage Drive Required (Ref. Lee Drawing #LFIX1001750A for Schematic) ■ Contact your Lee Sales Engineer for additional technical assistance and application information. Wetted Materials: Housing (PBT), Armature/Core (FeCr Alloy), Spring (316 SS), O-Ring (FKM) and Epoxy. See table below for Internal Seal and Plunger Head wetted materials. Leakage: 50 SµL/ min (max) on Air at 70°F (21°C) with 5 psig Applied to the Common Port ■ See dimensional drawings on reverse. SPIKE HOLD ACTUATION VOLTAGE VOLTAGE (vdc) (vdc) POWER CONSUMPTION INTERNAL PLUNGER AT HOLD VOLTAGE SEAL HEAD (mW) 540 Inlet: Vac – 45 psig Differential: 15 psid (max) 550 Lohms (14.6 SLPM @15 psid; Ref. Cv = 0.036) 900 Lohms Inlet: Vac – 50 psig (19.5 SLPM @ 50 psid; Differential: 50 psid (max) Ref. Cv = 0.022) 800 Lohms (10.1 SLPM @ 15 psid; Ref. Cv = 0.025) Inlet: Vac – 45 psig Differential: 15 psid (max) * The Lohm is a measure of flow resistance. Additional information can be found at www.theleeco.com. Inlet: Vac – 50 psig Differential: 50 psid (max) Face Mount 450 Lohms (39 SLPM @ 50 psid; Ref. Cv = 0.044) 650 Lohms (27 SLPM @ 50 psid; Ref. Cv = 0.031) OPERATING PRESSURE RANGE PART NUMBER CONFIGURATION 2-Way NC (Common Inlet) Differential Pressure (kPad) Differential Pressure (psid) Water Flow (ml/min) Spike Actuation Voltage Time: 10ms ■ The Lee Company offers an array of standard manifolds for testing as well as custom designed manifold configurations for production. Performance parameters can be optimized for a specific application. The Lo-Lohm Series solenoid valve simplifies the decisions engineers must make when designing valves into their product. Available in three styles (plug-in, face mount, and soft tube ported), this design is ideal for applications where space is limited. The Lee Company • 2 Pettipaug Road, PO Box 424, Westbrook, Connecticut 06498-0424 Tel: 860-399-6281 • Fax: 860-399-7037 • [email protected] • www.theleeco.com

LO-LOHM SOLENOID VALVE Plug-In Manifold 2X N.O. PORT 3X O-RING, INCLUDED MOUNTING MOUNTING HARDWARE HARDWARE SOLD SOLD SEPARATELY * SEPARATELY* .29 7.5 N.C. PORT COMMON PORT PORT SEAL PORT SEAL GASKET GASKET INCLUDED INCLUDED SCREW SUPPORT Soft Tube Ported 2X .34 8.5 Plug-In Boss Detail Face Mount Boss Detail .300 7.62 .150 3.81 0 0.00 VALVE FLANGE DATUM SURFACE 2X #2-56 (.086-56 UNC-2B) OR M2.0 .162 [4.11] MIN FULL THREAD COMMON PORT SEALING AREA Reference Drawing Number LFIX1001150A for Face Mount Boss Details. VALVE BOSS MAY BE CREATED USING LEE CO. CUTTING TOOL PART NO. TTTA0000180B NOTES:...