HI-Q PRESSURE RELIEF VALVE
2Pages

{{requestButtons}}

Catalog excerpts

HI-Q PRESSURE RELIEF VALVE - 1

product data sheet HI-Q PRESSURE RELIEF VALVE The Lee Company’s new Hi-Q Pressure Relief Valve is designed for applications that require both a high relief pressure and a high flow rate in a compact package. This new relief valve is capable of relief pressures up to 5400 psid and flow rates over 19 GPM. The valve utilizes a side inlet flow path to help minimize the installation boss size and weight. The Hi-Q Pressure Relief Valve is offered in a range of cracking pressures from 1000 to 5400 psid. It is designed for nominal system pressures up to 5000 psi and system peak pressures up to 6750 psi. Each Lee Pressure Relief Valve is 100% tested and inspected to ensure reliable, consistent performance. ■ Capable of Flow Rates Over 19 GPM ■ Cracking Pressures up to 5400 psid ■ 100% Tested and Inspected ■ Designed for System Pressures up to 5000 psi ■ Endurance Tested in Excess of 100,000 Cycles Restriction at Minimum Recommended Valve Lift:...600 Lohms Nominal System Pressure:.. up to 5000 psi Finish: All CRES Parts Passivated. The Lohm is a measure of flow resistance. Additional information can be found on the reverse side and at www.TheLeeCo.com. NOTE: Pressures in excess of 500 psid in the non-relief flow direction may cause damage to the valve's critical sealing surfaces. The Lee Company, 2 Pettipaug Rd., P.O. Box 424, Westbrook, CT 06498-0424 PDS 107 5/11 Tel: 860-399-6281 Fax, Order Entry: 860-399-7058 Fax, Technical Information: 860-399-7037 Web: www.TheLeeCo.com

Open the catalog to page 1
HI-Q PRESSURE RELIEF VALVE - 2

LEE LOHM LAWS LOHMS LAWS (liquids) Engineers will be interested in our simple system of defining the fluid resistance of Lee hydraulic components. Just as the OHM is used in the electrical industry, we find that we can use a liquid OHM or "Lohm" to good advantage on hydraulic computations. When using the Lohm system, you can forget about coefficients of discharge and dimensional tolerances on drilled holes. These factors are automatically compensated for in the Lohm calculations, and confirmed by testing each component to establish flow tolerances. The resistance to flow of any fluid...

Open the catalog to page 2

All THE LEE COMPANY catalogs and technical brochures

  1. LEE PLUG JET

    2 Pages

  2. LEE VILA

    2 Pages

  3. LEE 250 PRI

    2 Pages

  4. LEE 5K JEVA

    2 Pages

  5. 375 HD PRI

    2 Pages

  6. HDI Brochure

    4 Pages

Archived catalogs