*mydirectindustry

L 9180

Product catalog summary

Specifications:
The document provides a list of self-tapping inserts (Ensat) with specific dimensions and prices for 100 pieces. The dimensions include diameter (d), diameter of the head (d1), pitch (p), and length (l). Prices vary based on size, with examples ranging from M3 to M20.

Ordering Example:
An example for ordering is provided as L 9180 - A 1 - M 12.

Product Description:
Ensat self-tapping inserts are described, with Works Standard 302 recommended for most applications due to its cutting slot which can create a screw locking effect. For applications where this effect is undesirable, Works Standard 307/308 is recommended, especially for materials that are difficult to machine. These have a thicker wall and distribute cutting force across three cutting edges, making them suitable for thin wall applications.

Recommendations:
Works Standard 302 is generally recommended, but for materials that are tough to tap, Works Standard 307/308 is advised. The short length of Works Standard 307 is particularly suitable for thin materials and is available upon request.

Catalog excerpts

Ensat®-Gewinde-Einsätze, Werknorm 302 (selbstschneidend) Selftapping inserts (Ensat) Preise/Prices…100 Stück/pcs. Bestellbeispiel/example for ordering: L 9180 - A 1 - M 12 Werksnorm 302 (mit Schneidschlitz) wird für die meisten Anwendungsfälle empfohlen. In manchen Werkstoffen federt dieser Einsatz im Scheidschlitzbereich geringfügig nach innen und es entsteht ein gewisser Schraubensicherungs-Effekt. Ist dies unerwünscht empfehlen wir Werksnorm 307/308 (mit Schneidbohrung). Diese wurden für schwer zerspanbare Werkstoffe entwickelt. Sie haben eine dicke Wandung und die Schneidkraft ist auf drei Schneidkanten verteilt. Die kurze Bauform eignet sich besonders für geringe Materialstärken (auf Anfrage lieferbar). Works standard 302 (with cutting slot) is recommended for most cases of application. In certain materials, this Ensat slightly springs towards the inside in the area of the cutting slot, so creating a certain screw locking effect. If this effect is not desired, we recommend works standard 307/308 (with cutting bore) which are designed primarily for higher strength materials which are tough to tap. A truncated root external thread design and three-hole cutting edges permit increased wall thickness of the insert. The short length of works standard 307 is ideal to fit all thin wall applications (available on

Open the catalog to page 1

L 9180

L 9180

Catalog excerpts

All Lederer catalogs and technical brochures