Overview

This document provides technical specifications and pricing information for metal studs with threaded ends, conforming to the DIN 835 standard.

Product Description

The studs are metal fasteners with an insertion end approximately equal to twice the diameter (e ~ 2d). They are identified by the DIN 835 standard.

Ordering Example

Example for ordering: DIN 835 - A 2 - M 6 x 20, where:

• A 2 indicates the material or finish grade.
• M 6 is the thread diameter.
• 20 is the length in millimeters.

Dimensions and Parameters

Length and Pricing

Prices are given per 100 pieces and vary by thread diameter and length (l in mm). The table below summarizes key prices (in unspecified currency):

Packaging and Minimum Order Quantities

• Standard packaging quantities vary by size, typically 50 or 100 pieces per package.
• For lengths greater or equal to 90 mm, the minimum order quantity is 50 pieces.

Material Grade

The designation A 2 likely refers to the stainless steel grade or surface finish of the studs.

Critical Information Summary

• Studs conform to DIN 835 standard with metal insertion ends approximately twice the diameter.
• Available in multiple thread diameters from M6 to M20.
• Lengths range from 20 mm up to 120 mm with corresponding pricing per 100 pieces.
• Ordering requires specifying standard code, material grade, thread size, and length.
• Packaging and minimum order quantities are defined to ensure supply consistency.