- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
VX4
VX4
- Objectives: Includes 5X, 10X, 20X, and 50X objectives, with an optional 100X objective.
- Revolving Nosepiece: Can hold up to five objectives.
- Observation: Supports brightfield observation with a 360-degree polariser/analyser.
- Focus Adjustment: Coaxial coarse and fine focus adjustment available.
- Stage: Ergonomic mechanical XY stage for sample manipulation.
- Light Source: 5 W variable LED with built-in lever condenser, field, and aperture diaphragms.
- Eyepieces: Trinocular head with 10X/22 mm adjustable focusing eyepieces.
- Power Requirements: 115 V/230 V ±10%, 50/60 Hz, 3.2 A Maximum.
- Dimensions: 11.8 in W x 25.6 in D x 17.2 in H (300 mm x 650 mm D x 437.5 mm H).
- Weight: 23 lb (10.4 kg).
- 5X Objective: Numerical Aperture 0.15, Working Distance 10.8 mm.
- 10X Objective: Numerical Aperture 0.30, Working Distance 10 mm.
- 20X Objective: Numerical Aperture 0.45, Working Distance 4.0 mm.
- 50X Objective: Numerical Aperture 0.55, Working Distance 7.9 mm.
- 100X Objective: Numerical Aperture 0.80, Working Distance 2.1 mm.
- VX4 Inverted Metallographic Microscope: 863-777-150
- 100X Objective: 863-777-120
- 0.50X Adjustable Camera Coupler: 863-777-122
- 1.0X Adjustable Camera Coupler: 863-777-124
Catalog excerpts
VX4 Inverted Microscope The VX4 is a compact and practical microscopy solution for any metallurgical laboratory. This microscope comes equipped with a vibrant LED polarized light source that is perfect for inspecting mounted and unmounted samples. Standard Features • 5X, 10X, 20X, and 50X objectives included, with optional 100X objective • 5 W variable LED light source with built-in lever condenser with field and aperture diaphragms • Revolving nosepiece holds up to five objectives • Trinocular head with 10X/22 mm adjustable focusing eyepieces • Brightfield observation and 360 degree polariser/analyser • Coaxial coarse and fine focus adjustment • Ergonomic mechanical XY stage Objectives Magnification Numerical Aperture Working Distance VX4 Inverted Metallographic Microscope 0.50X Adjustable Camera Coupler 1.0X Adjustable Camera Coupler Specifications and part numbers may change. Consult LECO for latest information. ISO-9001:2015 Q-994 | LECO is a registered trademark of LECO Corporation. LECO Corporation 3000 Lakeview Avenue | St. Joseph, MI 49085 Phone: 269 – 985 – 5496 [email protected] | www.leco.com Form No. 209-291-EUW
Open the catalog to page 1All LECO catalogs and technical brochures
GDS Series12 Pages
Solutions for Food Analysis4 Pages
TGA8018 Pages
Pegasus GC-HRT+ 4D8 Pages
Pegasus GC-HRT+8 Pages
SS10002 Pages
MX5002 Pages
MX4002 Pages
LCB31002 Pages
828 Series8 Pages
TGM8008 Pages
736 Series8 Pages
RC6124 Pages
836 Series8 Pages
CS7448 Pages
832 Series8 Pages
CS844 Series8 Pages
Cornerstone Mobile2 Pages
928 Series8 Pages
GDS9008 Pages
Solution for Cement Analysis4 Pages
eBook Food48 Pages
AC6004 Pages
EATC Berlin8 Pages
AMH556 Pages
AC5002 Pages
AF7002 Pages
DH6034 Pages
PX300 Grinder/Polisher2 Pages
TruSpec Micro4 Pages
MSX305 R-Series2 Pages
MSX305 A-Series2 Pages
MSX432 A-Series2 Pages
MSX250 A-Series2 Pages
MSX255 M-Series2 Pages
MSX205 M-Series2 Pages
Sectioning Machines (EU)18 Pages
L-PAL32 Pages
Macro Digital Microscope2 Pages
SX100M2 Pages
PAX-it 22 Pages
CS744/844 with S832 Add-On2 Pages
CHN828 with S832 Add-On2 Pages
Organic Supplies – Catalog32 Pages
GC-TOFMS Technology Overview6 Pages
Pegasus BT 4D6 Pages
Pegasus BT6 Pages
- Cutting system
- Metal cut-off machine
- Gas analyzer
- Automatic cut-off machine
- Concentration analyzer
- Knife cutting system
- Analysis software solution
- Liquids analyzer
- LECO automatic analyzer
- Indentation hardness tester
- LECO benchtop analyzer
- LECO solids analyzer
- LECO spectrometer
- Measurement software
- Table-mounted hardness tester
- Oxygen analyzer
- Laboratory analyzer
- Digital display hardness tester
- Steel cutting system
- Compact cut-off machine