Overview
The LP-Type pneumatic presses are versatile machines designed for various assembly operations such as marking, pressing, forming, punching, bending, riveting, clinching, and mounting. They are particularly suitable for tasks where a simple pneumatic thrust is sufficient.

Specifications
- Available in four models: LP 4, LP 7, LP 14, and LP 20.
- Standard stroke length is 115mm, with mechanical stroke adjustment standard on LP 4 and optional on other models.
- Thrust capacities range from 4.4 kN to 20.8 kN at 6 bar pressure.
- Maximum operating air pressure is 6 bar.
- CE certified.

Design Features
- Standard C structure for maximum functional utilization.
- Custom versions available upon request.
- Ensured concentricity between press head centerline and component location.
- Base equipped with T slots.

Technical Features
- Return and work thrusts vary by model:
- LP 4: Return Thrust 4.2 kN, Work Thrust 4.4 kN
- LP 7: Return Thrust 6.7 kN, Work Thrust 6.9 kN
- LP 14: Return Thrust 6.7 kN, Work Thrust 14.2 kN
- LP 20: Return Thrust 6.7 kN, Work Thrust 20.8 kN

Dimensions
- Dimensions vary slightly between models, with weights ranging from 90 kg to 170 kg.

Production Programme
- Includes E-Type, CS-Type, KS-Type, and special press heads, clinching systems, pressure boosters, air-oil cylinders, and pneumatic and hydropneumatic units.

Contact Information
- Administration Department: Via Puccini, 13 -I- 20085 Locate T. (MILANO) Italia
- Factory: Via Del Lavoro, 8 -I- 24050 Bariano (BERGAMO) Italia
- Website: ldpitalia.com
- Email: [email protected]

Note
The company reserves the right to modify product characteristics at any time without notice.