Hydropneumatic Presses L-Type

Product catalog summary

Overview: The L-Type hydropneumatic presses are designed for operations requiring moderate thrust and short strokes. They are activated by connecting to a compressed air supply and can be enhanced with E-Type Press heads for additional features like speed and low noise.

Specifications:

Five models available with a standard approach stroke of 100 mm + 15 mm work.
Thrust options range from 9 to 50 kN at 6 bar pressure.
Concentricity between stem and bolster plate work.
Bolster plate equipped with T-slots.
Maximum operating air pressure is 6 bar.
CE Certification compliant.

Model Dimensions and Weights:

L 09: 100 kg, dimensions 1400x450x465 mm.
L 16: 120 kg, dimensions 1400x450x465 mm.
L 24: 160 kg, dimensions 1400x450x465 mm.
L 33: 420 kg, dimensions 1600x520x680 mm.
L 50: 430 kg, dimensions 1600x520x680 mm.

Thrust Details:

L 09: Approach Thrust 1.9 kN, Return Thrust 1.8 kN, Work Thrust 7.1 kN.
L 16: Approach Thrust 1.9 kN, Return Thrust 1.8 kN, Work Thrust 14.1 kN.
L 24: Approach Thrust 1.9 kN, Return Thrust 1.8 kN, Work Thrust 22.0 kN.
L 33: Approach Thrust 4.0 kN, Return Thrust 3.4 kN, Work Thrust 29.3 kN.
L 50: Approach Thrust 4.0 kN, Return Thrust 3.4 kN, Work Thrust 45.8 kN.

Production Programme: Includes E-Type, CS-Type, KS-Type, and special press heads, clinching systems, pressure boosters, air-oil cylinders, and pneumatic and hydropneumatic units.

Contact Information:

Administration: Via Puccini, 13 -I- 20085 Locate T. (MILANO) Italia, Phone: 0039 - 02 90731137, Fax: 0039 - 02 90730659
Factory: Via Del Lavoro, 8 -I- 24050 Bariano (BERGAMO) Italia, Phone: 0039 - 0363 95096, Fax: 0039 – 0363 959210

Note: The company reserves the right to modify product characteristics at any time without notice.

Catalog excerpts

Hydropneumatic Presses L-Type

Open the catalog to page 1

TECHNICAL FEATURES The L-Type hydropneumatic Presses are particularely suitable for operations where a fair thrust and a relatively short stroke are required. These Presses are set into operation by simply connecting them to the compressed airline supply port. By installing the E-Type Press heads, it is possible to concentrate in a single unit features like speed, compressed air low noise and the high hydraulically delivered thrust. The standard C structure enables maximum functional utilization. The design features though, allow for custom made versions supplied on request The standard control...

Open the catalog to page 2

Hydropneumatic Presses L-Type

Hydropneumatic Presses L-Type

Catalog excerpts

All LDP Italia - Thrust Technology srl catalogs and technical brochures