*mydirectindustry

E-Type TX

Product catalog summary

Overview
The document provides technical specifications and features of the E-Type Press Head, a pneumohydraulically operated unit designed to generate high thrusts using compressed air. It includes details on various models, mounting dimensions, and technical features.

Technical Specifications

The E-Type Press Head operates pneumohydraulically, leveraging the incompressibility of liquids to generate high thrusts.
There are 12 models available, offering thrusts ranging from 7 to 470 kN at 6 bar pressure, with a maximum operating pressure of 10 bar.
Models are equipped with a fast approach cylinder with a magnetic piston as standard.
The unit does not require external oil reclaiming.
A test sheet and instruction manual are provided with each unit.
The product comes with a warranty of 3 years or 1,000,000 operating cycles.

Model Specifications

EPY-37 TX: Approach thrust 1.95 kN, Return thrust 1.81 kN, Work thrust 22 kN.
EPI-56 TX: Approach thrust 2.7 kN, Return thrust 2.5 kN, Work thrust 33 kN.
EPX-77 TX: Approach thrust 4 kN, Return thrust 3.4 kN, Work thrust 45.8 kN.
EPX-121 TX: Approach thrust 4 kN, Return thrust 3.4 kN, Work thrust 71.5 kN.
EPP-125 TX: Approach thrust 6.2 kN, Return thrust 5.4 kN, Work thrust 73.9 kN.
EPP-196 TX: Approach thrust 6.2 kN, Return thrust 5.4 kN, Work thrust 115.5 kN.
EPW-256 TX: Approach thrust 10.3 kN, Return thrust 9.5 kN, Work thrust 150 kN.
EPW-349 TX: Approach thrust 10.3 kN, Return thrust 9.5 kN, Work thrust 204.9 kN.
EPH-400 TX: Approach thrust 16.5 kN, Return thrust 15.4 kN, Work thrust 235.3 kN.
EPS-785 TX: Approach thrust 25.8 kN, Return thrust 24.2 kN, Work thrust 461.8 kN.

Mounting Dimensions

Model EPY TX: 80 x 80 mm, C: M8 x 12, D: 54, F: f7 40, G: 10, H: f7 30, K: 26, L: M16 x1.5, M: 15.
Model EPI TX: 100 x 100 mm, C: M8 x 15, D: 64, F: f7 50, G: 10, H: f7 40, K: 28, L: M22 x 2, M: 20.
Model EPX TX: 130 x 130 mm, C: M10 x 16, D: 88, F: f7 70, G: 10, H: f7 50, K: 35, L: M30 x 2, M: 25.
Model EPP TX: 150 x 150 mm, C: M16 x 25, D: 100, F: f7 75, G: 15, H: f7 60, K: 36, L: M30 x 2, M: 25.
Model EPW TX: 180 x 180 mm, C: M20 x 30, D: 132, F: f7 100, G: 18, H: f7 70, K: 47, L: M39 x 2, M: 35.
Model EPH TX: 220 x 220 mm, C: M20 x 30, D: 132, F: f7 100, G: 18, H: f7 80, K: 47, L: M39 x 2, M: 35.
Model EPS TX: 280 x 280 mm, C: M20 x 30, D: 150, F: f7 115, G: 25, H: f7 100, K: 52, L: M42 x 2, M: 40.

Distribution and Contact Information

Distributed by LDP thrust technology.
Administration Department: Via Puccini, 13 -I- 20085 Locate T. (MILANO) Italia, Phone: 0039 - 02 90731137, Fax: 0039 - 02 90730659.
Factory: Via Del Lavoro, 8 -I- 24050 Bariano (BERGAMO) Italia, Phone: 0039 - 0363 95096, Fax: 0039 – 0363 959210.
Website: http://www.ldpitalia.com, Email: [email protected].

Production Programme

Includes E-Type, CS-Type, KS-Type, and special Press heads, pressure multipliers, air-oil cylinders, and pneumatic and hydropneumatic swan neck as well as pillar type presses.

Catalog excerpts

E-Type TX Press Head

Open the catalog to page 1

TECHNICAL FEATURES The E-Type Press Head is a pneumohydraulically operated unit that by virtue of liquids incompressibility it can generate high thrusts by using compressed air as its power source. - 12 Models with fast approach facility - Range of 7 to 470 kN thrusts at 6 bar pressure. - Max. Operating pressure is 10 bar - Configurations that enable to deal with any application. - Without external oil reclaiming. - Fast approach cylinder with magnetic piston as standard. - Test sheet & instructions Manual supplied with units. - 3 years or 1 000 000 operating cycles warrantee. PRODUCTION PROGRAMME:...

Open the catalog to page 2

E-Type TX

E-Type TX

Catalog excerpts

All LDP Italia - Thrust Technology srl catalogs and technical brochures