Marumerizer® Model QJ-700TWG LCI’s QJ-700TWG Twin Bowl Marumerizer is a large-scale production spheronizer with two separate bowls for converting wet pellets into spheres. Features Two 700 mm bowls Two 700 mm diameter friction plates 20 liters nominal batch size per bowl Batch operation with automatic discharge valve 316 SS GMP design with high polish finish 304 SS heating/cooling water jackets to prevent material sticking on the bowl Common discharge chute Integrated plate lifting device Limit switches on lids and discharge chute for safety 10 hp inverter duty motor in 460 VAC/3/60 Integrated controls on articulating arm Compressed air under plate Above: Twin Bowl Marumerizer system. Left: Systems are available with either manual or automatic integrated plate lifting devices. Below: Screens inside the twin bowls. Pellets are fed to the spinning friction plate and thrown against the Marumerizer bowl forming “twisting ropes”. Collision of particles with the wall, friction plate, and with other particles, results in the deformation of the pellets into spheres. The final particle shape is time and formulation dependent. Once the desired particle shape is achieved, the discharge valves are opened and the batches collected. The bowls can be run separately or simultaneously. The QJ-700 TWG can also be incorporated into a continuous system. LCI Corporation 4433 Chesapeake Drive Charlotte, NC 28216 Part of the Nederman Group V1-16

Marumerizer® Model QJ-700TWG Marumerizer Model QJ-700TWG Dimensions (shown in mm) Weight: LCI Corporation 4433 Chesapeake Drive Charlotte, NC 28216