A005 (TC10) UNIVERSAL TESTING MACHINE Capacity 10 kN (2248 lbf) Electromechanical computerized universal testing machine, TC series single hollow test, developed for the measurement of mechanical strength of the materials under load. Depending on the needs and the types of materials, it can perform testing of tensile, compression, bending, breaking tests, bend, extension, tension, force limit, deformation limit, dishing, etc.., According to the most common international standards ISO, ASTM, EN and UNI. The structure is a strudy from two columns and the moving crosshead driven by pre-loaded ball screws with zero backlash to ensure the accuracy of motion. The movement and the crosshead speed is controlled electronically by 24-bit microprocessor. The machine is controlled through LBG HIGH TOWN software for MS® Windows 7 Operating System, at all stages of diagnostics, calibration and performance test. The supply included : • Load Cell of 10kN (2248 lbf) tensile/compression • Personal computer • Color Deskjet printer A4 format • Manuals instruction • ACCREDIA Calibration certificate LAT • LBG HIGH TOWN software ( A007) The accessories to effect all the tests have to be ordered separately. TECHNICAL CHARACTERISTICS : 10 kN 0.001kN 0.5 500 mm/min 0.1 mm/min 500 mm/min Load Capacity Resolution Class ISO 7500-1 (dal 2% al 100% f.s.) Maximun Speed Minimun Speed Return Speed 19.69 in./mm 0.04 in./mm 19.69 in./mm Stiffness frame Crosshead Travel without accessories Crosshead Travel with tensile heads A006-A100 Column Spacing Dimensions width x depth x height Operating Temperature Relative Umidity Power Supply* * On request POWER SUPPLY : 115V 1ph 60Hz +T LBG srl Via PETRARCA, 5 – 24052 AZZANO S. PAOLO (BG) – ITALY Tel. +39 035 536762 – Fax +39 035 536049 E-mail: [email protected] URL: www.lbgsrl.com

STANDARD ACCESSORIES : A005-A100 TENSILE HEADS A pair of tensile heads for manual operation with seats. For grip pliers have to be ordered separately. Maximum capacity 10kN (2248 lbf). A005-A101 GRIPS A pair, with plain tightening surfaces applicable to specimens with thickness from 0 to 10 mm (0 to 0,394 in.) and until 28 mm (1.10 in.) width and 65 mm (2,56 in.) in length. The grips have to be lodged in the tensile head A005-A100. A005-A102 GRIPS A pair, with plain tightening surfaces applicable to specimens with Diameter from 3 to 6 mm (0,12 to 0,24 in.) and 65 mm (2,56 in.) in length. The...