*mydirectindustry

TC

Product catalog summary

Overview of Belt Conveyors
Belt conveyors, specifically the TP (flat section belt) and TC (concave section belt) models, are designed for transporting loose materials over both short and long distances. They are particularly suitable for handling abrasive materials with high moisture content.

Structure and Components
The structure of these conveyors consists of modular components made from shaped sheet metal with stiffening ribs. The supporting rollers for the belt are attached to this structure. The configuration of these rollers can be adjusted based on the material characteristics. The belt, or ring, is typically made from synthetic cloths coated with smooth rubber, although specialized rings can be used for specific applications.

Conveyor Ends and Drive Mechanism
The conveyor has two ends: the draft head and the return head, each equipped with drums to maintain belt tension. The drive mechanism is usually located at the draft head and can be a coaxial motor reducer with chain and pinion transmission or a pendular reducer directly connected to the drum shaft, using pulleys and trapezoidal belts for motion transmission.

Models and Dimensions
The document provides detailed dimensions for various models (TP 400, TP 500, TP 600, TP 800, TC 400, TC 500, TC 600, TC 800, TCT 600, TCT 800, TCT 1000) with measurements expressed in millimeters. These dimensions include various structural components labeled A, B, C, D, and E.

Reversible and Wheeled Versions
The TP/TC conveyors can be configured in reversible and/or wheeled versions. Reversibility allows the belt to rotate in both directions, achieved by installing a reversible motion transmission unit. Wheeled versions enable the entire machine to move, facilitated by a carriage attached to the main structure and an additional motor reducer on the belt.

Additional Features
Optional features include protections with gaskets for concave belts and rain-proof covers. The document notes that the technical data provided is non-binding and subject to change, advising consultation of the Use and Maintenance Handbook for product limitations.

Contact Information
For further inquiries, LB Officine Meccaniche S.p.A. provides contact details including their website, email addresses, and phone numbers.

Catalog excerpts

Nastri trasportatori Belt conveyors

Open the catalog to page 1

I trasportatori a nastro TP (nastro a sezione piana) e TC (nastro a sezione concava) vengono utilizzati per convogliare materiali sfusi. Sono idonei per il trasporto, sia su brevi che su lunghe distanze, di materiali anche molto abrasivi e con elevato contenuto di umidità. La struttura del trasportatore a nastro è costituita da un corpo ad elementi modulari in lamiera sagomata con nervature di irrigidimento, sul quale sono fissati i rulli di sostegno dell’anello. La configurazione dei rulli può variare a seconda delle caratteristiche dei materiali da trasportare. L’anello è generalmente realizzato...

Open the catalog to page 2

Sezione nastro piano Flat belt section Misure espresse in millimetri Dimensions expressed in millimeters Modello Model A TP 400 458 400 458 480 290 TP 500 558 500 558 580 290 TP 600 658 600 658 680 306 TP 800 858 800 874 880 306 Modello Model A B C D E TC 400 400 400 458 480 310 TC 500 500 500 558 580 330 TC 600 600 600 658 680 350 TC 800 800 800 858 880 430 Modello Model A B C D E TCT 600 660 600 658 680 400 TCT 800 860 800 858 880 580 TCT 1000 1060 1000 1058 1080 680 B C D E Sezione nastro in conca Concave belt section Sezione nastro in conca a terne di rulli Roller-tern concave belt section...

Open the catalog to page 3

I trasportatori a nastro TP/TC possono essere realizzati in versione reversibile e/o carrellata. La reversibilità, la possibilità cioè di far ruotare l’anello nelle due direzioni opposte, è ottenuta mediante l’installazione di un gruppo di trasmissione a moto reversibile. Nel caso di nastri carrellati l’intera macchina può traslare grazie ad un carrello fissato alla struttura principale e ad un moto-riduttore supplementare installato direttamente sul nastro. The belt conveyors TP/TC can also be made in reversible and\or wheeled versions. The reversibility, that means the possibility to rotate...

Open the catalog to page 4