1. Catalogs
  2. Layer Electronics s.r.l.
  3. Wind inverters Drepanum series

Wind inverters Drepanum series

Wind inverters Drepanum series

Wind inverters Drepanum series

Product catalog summary
Overview
The document provides technical specifications and features of the Drepanum wind inverters by Layer Electronics. These inverters are designed for grid connection and are compatible with various wind generators. They feature a wide wind MPPT input voltage range and comply with multiple international standards.

Key Features
  • Compatibility with any wind generator.
  • Wide wind MPPT input voltage range, modifiable on request.
  • Compliance with standards such as CEI 0-21, CEI 0-16, EN 50549-1, EN 50549-2, and IEC 62116.
  • High reliability with low harmonic distortion (THD < 2%).
  • IGBT technology with high commutation frequency.
  • Insulation transformer in low frequency for power ranges from 1.5 to 110 kW.

Technical Specifications
Models and Power Output
  • Models range from TP-1 (1.5 kW) to TP-110 (110 kW).
  • Input MPPT voltage ranges vary by model, with customization available.
  • Output features include sine wave form, harmonic distortion < 2%, and efficiency > 94%.

Environmental and Physical Characteristics
  • Operating temperature range: -10°C to 55°C.
  • Non-condensing humidity: 0% to 95%.
  • Noise level: < 50 dBA at 1 meter.
  • Protection rating: IP20.
  • Dimensions and weight vary by model.

Compliance and Standards
  • CE Marking: 2014/30/EU; 2014/35/EU.
  • Compliance with standards such as EN 62109-1, EN 62109-2, IEC 62477-1, and others.

Additional Features
  • Earth fault detection and protection against input overvoltages.
  • External communication options include RS232, RS485, SNMP, and CAN.
  • Standard display and LED indicators for input, inverter, and grid status.
See more

Catalog excerpts

Wind inverters Drepanum series-1

Compatibility with any wind generator Wide wind MPPT input voltage range even modifiable on request Compliance with the standards CEI 0-21, CEI 0-16, EN 50549-1, EN 50549-2, IEC 62116 High reliability Insulation transformer in low frequency for all the range from 1.5 to 110 kW Only produces a small amount of harmonic distortion for mains (THD < 2% in accordance with the standard IEEE 929) IGBT Technology with a high commutation frequency The DREPANUM wind inverters are the latest generation of grid connected inverters, fed by a wind generator. Unlike the other grid connected wind inverters on the market, our Drepanum inverters don’t result from solar inverters and are the only ones that implement an automatic wind MPPT (Maximum Power Point Tracking) algorithm, that allows to supply always the maximum power available from the generator under each wind speed. All the other inverters, instead, supply power to load in accordance with a predetermined power vs. frequency table, that doesn't keep in mind of changeable conditions of the wind. Moreover, since LAYER wind generators can produce a higher power than the nominal one, our inverters are oversized to be able to supply higher power without any problem. Drepanum wind inverters can be customized for any horizontal or vertical-axle wind generator. Layer Electronics s.r.l. - S.P. km 5,3 C/da S. Cusumano - 91100 Trapani - Italy - Tel. +39 0923 562794 - Fax +39 0923 567880 - www.layer.it - [email protected]

 Open the catalog to page 1
Wind inverters Drepanum series-2

Layer Electronics s.r.l. - S.P. km 5,3 C/da S. Cusumano - 91100 Trapani - Italy Tel. +39 0923 562794 - Fax +39 0923 567880 - www.layer.it - [email protected]

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.