Voltage Stabilizers SH series

1 / 1 PageView full catalog

Voltage Stabilizers SH series

Product catalog summary

Technical Specifications

Models: SH-1 to SH-10
Power Range: 100 VA to 5000 VA
Input: Single-phase, Voltage 220/230/240 V ± 20% (optional 100/110/115/120/127 V), Frequency 50/60 Hz
Output: Sine wave, Harmonic distortion < 3%, Voltage 220/230/240 V ± 2% (optional 100/110/115/120/127 V), Frequency 50/60 Hz
Efficiency: 75% at full load
Intervention Time: 0.01 to 0.04 seconds
Voltage Variations: < 3% from 0 to full load
Attenuation of Mains Disturbances: 50 dB at 0.1 MHz, 55 dB at 1 MHz, 70 dB at 100 MHz
Test Voltage: 2250 V between line and mass

Signals

LED indicators for Input and Output

Environmental Conditions

Temperature: 0°C to 50°C
Humidity: 0% to 95% non-condensing
Cooling: Air type
Protection Rating: IP20

Dimensions

Varies by model, e.g., 310 x 310 x 180 mm to 250 x 660 x 560 mm

Compliance and Standards

CE Marking: 2014/30/EU; 2014/35/EU
Standards: IEC 742

Contact Information

Factory - Head Office: S.P. km 5,3 C/da San Cusumano - 91100 Trapani - Italy
Tel: +39 0923 562794
Website: www.layer.it
Email: [email protected]

Catalog excerpts

Factory - Head Office S.P. km 5,3 C/da San Cusumano - 91100 Trapani - Italy Tel. +39 0923 562794 - Https://www.layer.it - E-mail: [email protected]

Open the catalog to page 1

All Layer Electronics s.r.l. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list