*mydirectindustry

UPS Proton series

Product catalog summary

Overview: The document provides technical specifications for the PROTON series models P-401 to P-492. These models are uninterruptible power supplies (UPS) with varying power capacities ranging from 0.6 kVA to 10 kVA.

Specifications:

Power: Models range from 0.6 kVA to 10 kVA.
Input: Single-phase with voltage options of 220/230/240 V ± 20% and frequency of 50/60 Hz ± 5%.
Output: Sine wave with harmonic distortion < 2%, crest factor of 2:1, voltage stability of ± 1%, and frequency stability of ± 0.2%.
Overload Capacity: 125% for 10 minutes, 150% for 1 minute, and 200% for 0.1 seconds.
Efficiency: Greater than 92%.
Static Switch Transfer Time: Less than 2 ms.

Batteries:

Type: Sealed lead-acid with options for NiCd, Li-Ion, and NaNiCl2.
Restored Energy Time: 4 hours for 90% charge level.
Stored Energy Time: Varies by model, up to 3 hours.

Protections: Includes overload, overtemperature, voltage limits, synchronism, and electronic short-circuit protection.

Signals and Interfaces:

LED Indicators: Mains, Output, Battery, Overload, Fault On, Stand-by, Fault.
Display: Optional standard display.
Acoustic Signals: Indicate battery mode, low battery, overload, overtemperature, and faults.
Computer Interface: RS232, RS485, SNMP, CAN (optional).

Environmental Conditions:

Temperature Range: 0°C to 50°C.
Humidity: 0% to 95% non-condensing.
Noise Level: Less than 60 dBA at 1 meter.
Protection Rating: IP20.

Compliance and Standards: The UPS complies with EN 62040-3 classification VFI and CE Marking 2014/30/EU and 2014/35/EU. It adheres to various EN standards for UPS and EMC.

Contact Information: Factory and head office located in Trapani, Italy, with contact details provided for further inquiries.

Catalog excerpts

Technical Data PROTON series MODEL Power - kVA Input Phases Voltage Frequency Output Wave-form Harmonic distortion Crest factor (nonlinear load 75%) Voltage Frequency Overload Efficiency Static switch mains-ups Batteries Type Restored energy time Stored energy time - h Protections Short-circuit EMI Suppression Signals LED Display Acoustic Computer interface Transfer time < 2 ms Sealed lead-acid (NiCd / Li-Ion / NaNiCl2 on request) 4 hours for 90% charge level 1 Overload, overtemperature, min/max battery voltage, min/max input voltage, min/max inverter voltage, synchronism With electronic protection EMI/RFI Filter Mains, Output, Battery, Overload, Fault Optional Battery mode, low battery, overload, overtemperature, fault RS232 - RS485 - SNMP - CAN (optional) On, Stand-by, Fault Standard

Open the catalog to page 1

Factory - Head Office S.P. km 5,3 C/da San Cusumano - 91100 Trapani - Italy Tel. +39 0923 562794 - Https://www.layer.it - E-mail: [email protected]

Open the catalog to page 2

All Layer Electronics s.r.l. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list