BOW - Optical Print Detecion
3Pages

Issue version B2022 - Technical Changed Reserved BOW - Optical Print Detection For the detection of printed cables and optic bres Technical details : Head Monitor Touchscreen Supply Voltage Connected with the Cabin Imput Power Connected with the Cabin Range Speed Limit Customisable * : The range and resolution are customisable; A line and application study will be carried out in order to prepare and customise each machine for the customer’s needs. Device details : • Product maximum speed up to 1200 mt/min. • Can detect on every product’s diameter. • BOW - Optical Print Detection, can detect :no marking, over-marking, marking changes, font cuts, ink stains on marking and unmarked product. • Easy livestream of the actual mark/print allows the operator to set-up the printer and start the line production without e ort. • Can detect every black or white coloured paint/mark on every single colour product (Other paint/mark colours need a customised set-up) • Easy detection of the mark/paint on the product thanks to the 180° or 360° motorised optical device (our patented tecnology* allows BOW - Optical Print Detection to rotate around the extruded product in order to set the Optical device up to intercept the mark/print while the product itself rotate) • Fast and intuitive software interface. • Little training required ( initial operating instruction after installation requires 30 min ) • Various CAQ software are connectable. • Internal/external Database allows the operator to recall recipes for an easy set-up. • No user in uence on default optical focus as well as default optimised, intelligent and homogenous lighting. • Green, yellow, orange and red light signals alert for non conformity. • The software enables various operator level settings (production, administration, service etc.) • Standardised individual components lead to supply security and therefore a short delivery period. • Easy connection with external devices. • Optical hardware are protected with tempered glass which is easy replaceable and easy to clean. • Plug In connectors easy to connect for an easy installation or transportation. • Monitor touchscreen console can be placed far from the device. E-Mail : sales@lasertecno.it

BOW - Optical Print Detection Issue version B2022 - Technical Changed Reserved • Camera-based system design and studied for Mark/Print detection on the surface of extruded product such as Cables, Fibre Optic, Tubes, Pipes and similar. • Device designed for production lines. • Line encoder signal needed. • When needed, the device can be customised and adapted for almost every application. • The device can be used to detect all kind of print made by printers ( ink. printers ). Quick Software Overview : • The grey frames change colour (green, yellow, orange, red) depending on the status of the...

BOW - Optical Print Detection Issue version B2022 - Technical Changed Reserved Product’s Overview : Note : the product depicted in this image represents a display con guration. The application of the same product will be di erent depending on the customisation and set-up. E-Mail : sales@lasertecno.it