SGD 28-M, PanelPilot Compatible Smart Graphics Display
5Pages

{{requestButtons}}

Catalog excerpts

SGD 28-M, PanelPilot Compatible Smart Graphics Display - 1

PanelPilot Compatible Smart Graphics Display ORDERING INFORMATION Standard Display (Panel meter, fixing kit, quick start guide) USB Cable (Type A to mini-B) • 2.8” colour TFT screen • Use PanelPilot software, to setup and customise the display. Compatible with Windows XP, 2000, Vista and 7 • Multiple voltmeter configurations included free • Option to download other types of meter from the PanelPilot subscription service • Programmable via the USB interface • Simple panel mounting solution • Wide operating voltage of 4V – 30V d.c. • Measures voltage from 0 – 40V d.c. • Digital Hold The SGD 28-M is a PanelPilot Compatible graphics display with a 320 x 240 pixel (QVGA) colour display and USB programming interface. Using the PanelPilot software (available for Windows XP, 2000, Vista and 7), users are able to choose from an ever-increasing number of configurations (six voltmeters at launch) which can then be customised to their needs. The additional voltmeter types and other functions are available using an annual subscription based service through www.PanelPilot.com. Colours, text labels, splash screen and input voltage scaling can all be customised by the user through the software and then uploaded to the SGD 28-M through the USB connection. Panel or enclosure installation of the display is simple, using a panel fixing clip to mount the display, and 4 screw terminals to connect the inputs. SPECIFICATIONS Minimum Linearity Sample rate Count Samples / second Supply voltage Measurement voltage (single ended only)** Supply current *** Operating temperature range * Depending on user calibration settings ** The SGD 28-M uses a programmable gain amplifier. There are 8 different voltage ranges, to optimise the resolution. See page 2 for details. *** Voltage dependent. See graph on Page 2. www.lascarelectronics.com Specifications liable to change without prior warning

Open the catalog to page 1
SGD 28-M, PanelPilot Compatible Smart Graphics Display - 2

PanelPilot Compatible Smart Graphics Display HARDWARE Screw Terminal Functions 1 IN2 Analogue voltage input 2 (maximum of 40V d.c.) 2 IN1 Analogue voltage input 1 (maximum of 40V d.c.) 3 0V 0V power supply input Positive power supply input (4V – 30V d.c.) Typical Supply Current Voltage Input The SGD 28-M features 2 voltage inputs, which use a Programmable Gain Amplifier (PGA) to make the best use of available resolution (the smallest voltage range offers the highest resolution). Each channel can be programmed independently, with the option of eight different input voltage ranges: The input...

Open the catalog to page 2
SGD 28-M, PanelPilot Compatible Smart Graphics Display - 3

PanelPilot Compatible Smart Graphics Display Display The display is a 2.8” TFT panel, with a resolution of 320 x 240 pixels and a 16-bit color depth. Any graphics that are uploaded to the meter are automatically converted to this specification. A resistive touchscreen is fitted, for use with supporting applications. Clean the screen with a damp, soft, lint free cloth. Panel Mounting The SGD 28-M can be fitted into panels 1mm - 3mm deep. A silicone seal is included to improve fitting on thin panels. The minimum panel thickness is increased to 2mm if the seal is not fitted. Panel cut-out is...

Open the catalog to page 3
SGD 28-M, PanelPilot Compatible Smart Graphics Display - 4

PanelPilot Compatible Smart Graphics Display PANELPILOT SOFTWARE Lascar’s PanelPilot software is available for download free of charge from www.PanelPilot.com. Easy to install and use, the control software runs under Windows 2000, XP, Vista and 7. The software is used to setup the appearance and operation of the meter and then upload these settings to the meter. Multiple types of voltmeter are supplied with the software. Additional voltmeters and functions will be made available using an annual subscription based service through www.PanelPilot.com. See the website for details of available...

Open the catalog to page 4
SGD 28-M, PanelPilot Compatible Smart Graphics Display - 5

PanelPilot Compatible Smart Graphics Display VARIOUS OPERATING MODES 4 - 30V R = (VS - VL) IL VS = Supply voltage VL = LED Voltage drop IL = LED current DIGITAL HOLD ALARM OUTPUTS DIGI1 will hold the display for IN1 DIGI2 will hold the display for IN2 Applications that feature an alarm can be connected as above. ALM1 and ALM2 must not sink more than 10mA maximum. If supply voltage varies, use an appropriate voltage regulator. MEASURING 4-20mA Use a 50 Ω resistor with a 200mW rating. Setup scaling in software 0V=4.0 and 1V=20.0 Cannot be loop powered. Supply must be isolated for current...

Open the catalog to page 5

All Lascar Electronics catalogs and technical brochures

  1. EL-MOTE-ULT+

    2 Pages

  2. EL-WiFi-ULT+

    2 Pages

  3. EL-WiFi-TPX+

    2 Pages