HYDRAULIC CYLINDERS. GENERAL FEATURES LARZEP cylinders are made of the highest quality materials. Our wide ranges of products are able to perform all kind of industrial applications such as: lifting, pushing, pulling, bending, holding, etc. The Quality System UNEEN ISO 9001:2008 and the compliance with the standard ANSI-B30.1 guarantees the design, manufacturing, supply and after-sales service. All our models are tested under a safety factor of 1,5 to meet the requirements of the European Standards CE and all our products are tested individually in order to maximize the quality and the safety of all them. • Fully comply with ANSI B30.1 • All units load tested under 125% of the nominal capacity. • Mechanical end of stroke gland avoids over travel at full pressure. • Cylinder bodies made out of solid high strength alloy steel. • Hard chrome plated pistons. • Wiper seal reduces contamination and allows longer life. • Wear rings for long service life and high absorption of side loads. • Hardened grooved saddles as standard, optional tilting saddles improve side load resistance. • Heavy cylinders include carrying handles or eye bolts. • Female coupling AZ3140 with plastic dust cap included in all cylinders. • LARZEP designs and manufactures special cylinders and fixing systems.

Cylinder type Single Acting Spring Return Cylinders Attachments for SM and D cylinders Aluminium Single Acting Cylinders, Spring Return Single Acting Hollow Piston Cylinders, Spring Return Aluminium Single Acting Cylinders, Hollow Piston, Spring Return Single Acting Low Height Cylinders, Load or Spring Return Single Acting Low Height Cylinders, High Tonnage, Load Return Single Acting Low Profile Cylinders, Load or Spring Return Single Acting Lock Nut Cylinders, Load Return Aluminium Single Acting Cylinders, Lock Nut, Load Return Aluminium Single Acting Cylinders, Lock Nut, Stop Ring, Spring Return...

SINGLE ACTING SPRING RETURN CYLINDERS LARZEP advantages - Capacity from 5 to 220 Tn, stroke up to 360 mm. - Industrial general purpose cylinders. - Strong spring for quick retraction, can be used in all positions. - Collar threads, piston end threads and base holes, for accessory mounting. - Hard chrome-plated piston with wiper seal to extend cylinder life. - Heavy cylinders have carrying handles or eye bolts as standard. SM cylinders are equipped with hardened grooved saddles. In case of operation under side loads, LARZEP can supply tilting saddles. Page. Special attachments for SM and D models....

Performance under Pressure S/A SPRING RETURN Stop ring can withstand full capacity of the cylinder. Guiding bands to improve resistance againts side loads. Carefully read and understand the safety instructions. CYLINDERS CYLINDERS Body made of solid steel. Pump and Cylinder Sets. Page. Lightweight Aluminium Cylinders, SAM. Page. Double Acting Cylinders, D. Page. Larzep designs and manufactures special cylinders and fixing systems, upon request. Pressure Gauges. Page.

models are not provided with removable saddles. The top side of the piston has been heat treated to upgrade its hardness.

Performance under Pressure K With tilting saddle

SPECIAL ATTACHMENTS FOR SM AND D MODELS Base plate Model Mounting block Model When using this accessory do not exceed 350 bar.

Performance under Pressure CYLINDERS_ CYLINDERS Clevis eye piston Model Larzep designs and manufactures special cylinders and fixing systems, upon request.

ALUMINIUM SINGLE ACTING CYLINDERS, SPRING RETURN LARZEP advantages - Lightweight general purpose cylinders from 23 to 200 Tn, stroke up to 300 mm. - Made out of high strength aluminium alloy. - Solid piston, spring return. Carefully read and understand the safety instructions. - All aluminium parts are treated to improve resistance and extend working life. - 40% weight reduction when compared with steel equivalent. - Fitted with steel base plate and saddle for wear resistance. - Not suitable for high cycle applications. Coupler 3/8”-18 NPT included. Page.

Performance under Pressure Larzep manufactures special aluminium cylinders. For further information, contact us. The body, stop ring and piston of the cylinder are hard anodized to strengthen the working area and extend its working life. Lightweight Aluminium Hollow Piston Cylinders SAH. Page. The weight reduction makes them especially suitable for use in sites of difficult access. It is highly recommended to place the cylinder on a flat area in order to avoid any damage to the base. Double Acting Aluminium Cylinders, DDA. Page. Aluminium Single Acting Cylinders with Lock Nut SAT. Page.

Aluminium Single Acting, Spring Return Cylinder, with Lock Nut and Stop Ring, SATM. Page. Carefully read and understand the safety instructions. Hoses. Page.

Performance under Pressure Pressure Gauges. Optional Tilting Saddle. Page. With tilting saddle

SINGLE ACTING HOLLOW PISTON CYLINDERS, SPRING RETURN LARZEP advantages - Hollow cylinders from 12 to 100 Tn, stroke up to 150 mm. Strand jacks and Post tensioning available upon request. - Designed for carrying out push and pull operations. - Tightening of cables, bars, bolts, etc. Extraction of sleeves, bearings, etc. - Hollow hard chrome-plated piston. - Collar threads, piston thread and base holes for easy fixing. - Interchangeable with our complete puller range. - Hollow plain saddle as standard. Optional solid or threaded saddles available. Carefully read and understand the safety instructions....

Performance under Pressure HOLLOW PISTON CYLINDERS Interchangeables Saddles: plain, threaded or solid. Cylinder and Pump Sets. Page. Aluminium Single Acting, Hollow Piston Cylinders SAH. Page. Double Acting Hollow Piston Cylinders, DH. Page.

ALUMINIUM SINGLE ACTING CYLINDERS, HOLLOW PISTON, SPRING RETURN LARZEP advantages - Lightweight hollow cylinders from 22 to 100 Tn and up to 250 mm stroke. - Made out of high strength aluminium alloy. - Hollow piston, spring return. - All aluminium parts are treated to improve resistance and extend working life. - Fitted with steel base plate and saddle for wear resistance. - 40% weight reduction when compared with steel equivalent. - Hollow plain saddle as standard. - Not suitable for high cycle applications. Strand jacks and Post tensioning available upon request.