Accessories
14Pages

ACCESSORIES. GENERAL FEATURES • Wide range of accessories to optimize our products performance. • Hoses, Couplers, Tilting saddles, Hollow saddles, Flow control valves, Fittings and Manifolds, Pressure gauges and Directional control valves are available as standard. • Wide range of standard hoses up to 100 metres and 720 bar working pressure. Available hoses for 1.100 and 1.800 bar working pressure and Twin hoses for torque wrenches. • Low flow and high flow quick couplers available as standard. Working pressure: 700 bar, 1.000 bar and 1.500 bar. • Wide range of Flow control valves: Snubber valves, Flow regulating valves with 2 or 4 outlets, Manually operated check valve, Single way flow regulating valve, Check valve, Pressure relief valve and Pilot operated check valve. • Tilting saddles highly recommended for its use with side loads. Hollow saddles used in hollow piston cylinders specially in pulling and tensioning operations. • Wide range of fittings and manifolds for multiple applications. • Glycerine filled pressure gauges for monitoring working pressure and force. Available digital pressure gauges. • 3- or 4- ways directional control valves for single and double acting cylinders, suitable for remote operation.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Duis dignissim nisi ac elit interdum scelerisque. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean imperdiet aliquam dui et commodo. Sed vestibulum felis vel mauris feugiat lacinia. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Accessories type Flow Control Valves Pressure Gauges Directional Control Valves

HYDRAULIC HOSES LARZEP advantages - 4:1 Safety Factor. - Wide range of standard hoses. Hoses can be supplied in any length to order. - Rubber Guard on both ends. Carefully read and understand the safety instructions. - 3/8”-NPT thread on each end. Can be supplied with couplers on one or both ends. - Internal Diameter 6,4mm; Oil Capacity: 35 cm³ per metre. Never exceed the maximum working pressure of the hose. - Internal Diameter 9,5mm; Oil Capacity: 75 cm³ per metre. - Twin hoses for torque wrenches available. AR model. - 1.100, 1.800 and 2.800 bar working pressure hoses available. Never...

Performance under Pressure Apply 2 rounds of Teflon around all 3/8” NPT threads of the system, in the thread direction, leaving the first thread uncovered to prevent the tape breaking and entering the hydraulic system. Torque: 80 Nm. MAXIMUM WORKING PRESSURE 700 BAR Int. ø TWIN HOSES AR, FOR TORQUE WRENCHES - MAXIMUM WORKING PRESSURE 700 BAR Int. ø MAXIMUM WORKING PRESSURE 1.100 BAR Int. ø MAXIMUM WORKING PRESSURE 1.800 BAR Int. ø Hand Pumps, Jacks HYDRAULIC HOSES

HYDRAULIC COUPLERS LARZEP advantages - Low flow and high flow couplers, from 6 to 40 litres/min. - 700 and 1.000 bar couplers have 3/8”-18 NPT thread. 1.500 bar couplers have 1/4”-BSP thread. - Male and Female couplers can be supplied separately. Carefully read and understand the safety instructions. - Steel dust cup available for AZ3120, AZ3140 and AZ3141 couplers. - AZ3321, AZ3322, AZ3324, AZ3325, AZ3341, AZ3344 and AZ3345: ball quick couplers to guarantee easy and quick connection. Never apply pressure to the coupler when it is disconnected. - AZ3120, AZ3140 and AZ3141: standard high...

Performance under Pressure Steel dust cup available: AZ3144 for female couplers AZ3140 and AZ3141. AZ3124 for male coupler AZ3120 Plastic dust cup AZ3103 available to suit AZ3120, AZ3140 and AZ3141 couplers. Female Male AZ3344 AZ3321, AZ3322, AZ3324 and AZ3325 male couplers are connectable with AZ3341, AZ3344 and AZ3345 female couplers. HYDRAULIC COUPLERS HIGH FLOW COUPLERS 700 BAR

FLOW CONTROL VALVES SNUBBER VALVE Used for flow control and load AZ5121 no'd'n9 wnen closed. Also Model MANIFOLD WITH FLOW REGULATING VALVE, 2 OUTLETS Symbol Used for flow control of two AZ5122 outlets from one pressure Model MANIFOLD WITH FLOW REGULATING VALVE, 4 OUTLETS Symbol I Used for flow control of four AZ5124 outlets from one pressure

Performance under Pressure FLOW CONTROL VALVES LARZEP advantages - All valves have 3/8”-NPT pressure ports to prevent leakage. MANUALLY OPERATED CHECK VALVE - All flow and pressure control valves are designed for 700 bar working pressure. Open allows oil flow in both directions. AZ5200 Closed allows oil flow in one direction only, holding the load in the other one. SINGLE WAY FLOW REGULATING VALVE Open allows free flow in both directions. AZ5255 Similar to AZ5200, allows free oil flow in one direction and in the other it can be regulated or completely closed. Model CHECK VALVE Allows oil...

LARZEP advantages - Highly recommended for its use with side loads. - These saddles allow up to 5° tilt angle. - Push-in or threaded to suit various cylinder models. - Used in hollow piston cylinders. - Especially used in pulling operations and as support. - These saddles can be plain, threaded or solid.

Performance under Pressure AZ04 TILTING SADDLES TILTING SADDLES Model Cylinder Model THREADED TILTING SADDLES Model Cylinder Model AZ04 THREADED TILTING SADDLES HOLLOW SADDLES Standard Plain Cylinder Model

LARZEP advantages - Wide range of Fittings and Manifolds for multiple applications. - On request, LARZEP can supply other accessories to special requirements of threads and sizes. HEXAGON NIPPLE Model ADAPTOR Model

Performance under Pressure ADAPTOR ELBOW GAUGE ADAPTOR

PRESSURE GAUGES LARZEP advantages - High accuracy gauges, ±1.6 % full scale. - Essential for monitoring working pressure or force. - Available as system pressure gauges or as dual scale gauges to measure load on specific cylinders. - Glycerine filled gauges. - Gauge adaptor AZ1502 for AV10006. For all other gauges use AZ1501 gauge adaptor. Used with NOTE: Do not exceed the 70% of the nominal capacity of the gauge. Digital pressure gauge: Reference: AVD07080. Thread: 1/4”-BSP. Gauge adaptor: AZ1507. Gauge Adaptor PRESSURE GAUGES