Application: The Melt Flow Indexer is designed according to ISO1133, ASTM D1238. It is suitable for determining the MFR and MVR of thermoplastic. Not only machine can have low melt temperature, but also it has been widely used in testing the high melt temperature plastics such as PC, Fluor plastics and nylon, PE, PP, POM, PS, ABS resin plastics with mini printer to print the test results. Using Delta brand PLC (Programmable Logic Controller), it has better stability and reliability. Technical parameters Temperature range Temperature accuracy Resolution ratio Inner diameter of the cylinder Diameter of the piston head Length of the piston head 6.350±0.100mm Calibrated loads are to total value stamped on weight with correct piston (0.325kg,1.2kg, Load level 2.16kg, 3.8kg. 5.0kg, 10.00kg,12.5kg, 21.6kg) Diameter of mould Cutting method Manual and automatic control Working environment Power supply