Introduction CM-T200 is a continuous flow reactor for laboratory reaction screening and process optimization. The structure design of CM-T200 series glass microchannel reactor takes into account the two major factors of mass transfer and pressure drop. There is no sudden shrinkage and sudden expansion in the process flow channel, ensuring high mass transfer efficiency and small pressure drop. Combined with the heat exchange platform, mass and heat transfer efficiency can be maximized, which is suitable for various challenging chemical substances and process conditions. 1. Reactor material: high borosilicate float glass 2. Number of chips: 4 types of reaction chips are optional 5. Main uses: liquid-liquid mixing and gas-liquid mixing, suitable for most reaction processes. 6. The system mainly consists of four parts: microchannel reactor, feed system, electric control system, temperature control system. 7. Equipped with touch screen, pipelines and panel, safety valve, pressure sensors and temperature sensors, etc. 1. Four kinds of structural design can be selected to meet the needs of different process conditions. 2. Glass material, high temperature resistance, compatible with all reagents (except hot concentrated alkali, molten alkali metal, hot concentrated H3PO4, HF) and strong etchant , also can run stably for a long time. 3. Visualization, each module can be used for independent direct observation or shooting - the viewing window can be used for direct observation of process conditions or microscope shooting fluids. 4. Photochemical reaction - The window can use LED or mercury lamp to achieve photocatalytic process (by adding LED or mercury lamp light source module, photocatalytic reaction can be achieved). 5. Good heat and mass transfer performance, single sheet multiple static mixing unit structure to achieve efficient mixing. 6. Highly flexible modular design, enabling one-step and multi-step reactions. 7. Larger than surface area, combined with heat exchange system it can accurately control temperature and promote the generation of target products. Tel:+86-10-67086287 Fax: +86-10-67085997 Email: [email protected] Website: www.laryee.com Copy Right © 2025 LARYEE TECHNOLOGY CO., Ltd. @ LARYEE GROUP LIMITED^

8. Small liquid holdup (microliter), less consumption of raw materials/reagents required for reaction, which can be used for experimental exploration of precious raw materials and to improve the safe synthesis of dangerous substances. For the synthesis of expensive reagents, it has advantages of high economy and cost reduction in the research and development process. 9. Suitable for all kinds of liquid-liquid rapid reaction, strong exothermic reaction, dangerous reaction and chemical synthesis reaction requiring good mixing conditions. 10. Compared with the amplification effect of the traditional...

CM-T MicroChannel Reactors CM-T Lab-scale Continuous Flow MicroChannel Reactors Channel Length Temperature Range Operating Pressure Applicable reaction conditions It suitable for most reaction processes. Such as Liquid-liquid mixing and gas-liquid mixing. General-purpose micro-reactor, suitable for most reaction processes. The process-enhanced micro-reactor has good effect on the reaction which has large difference density for two-phase, low reaction rate constant, and small fluid viscosity. The process-enhanced micro-reactor has a good effect on the reaction with a large difference in two-phase...

Control system Function: ► Control and display of flow rate and flow velocity. ► Record system pressure, reaction time, temperature of each site, etc.; ► Record chemical stoichiometric ratio or volume ratio, collected volume; ► Control system solvent cleaning and cleaning time and speed. Temperature Control System 1. Fully enclosed compressor, reliable quality; 2. Use digital intelligent thermostat and Pt100 thermal resistor temperature measurement system for temperature control, simple operation and high precision; 3. Integrate heating and cooling cycles, reasonable power configuration, and...