D50
1 / 2 PagesView full catalog
D50
Product catalog summary
Performance Specifications
- Capacity: Up to 2,750 tons/hour
- Casting Distance: Up to 46 meters (150 feet)
- Capacity: Up to 2,750 tons/hour
- Casting Distance: Up to 46 meters (150 feet)
Dimensions
- Length from Attach Plate to Front: 2,083 mm (82 inches)
- Overall Width: 2,800 - 2,900 mm (110 - 114 inches)
- Overall Height: 3,530 - 3,990 mm (139 - 157 inches)
- Working Height: 1,400 mm (55 inches)
- Weight: 4,445 kg (9,800 lbs)
- Length from Attach Plate to Front: 2,083 mm (82 inches)
- Overall Width: 2,800 - 2,900 mm (110 - 114 inches)
- Overall Height: 3,530 - 3,990 mm (139 - 157 inches)
- Working Height: 1,400 mm (55 inches)
- Weight: 4,445 kg (9,800 lbs)
Engine
- Model: Cummins QSB6.7 T4F
- Power: 231 kW (310 hp) @ 2200 RPM
- Model: Cummins QSB6.7 T4F
- Power: 231 kW (310 hp) @ 2200 RPM
Driveline System
- Type: Mechanical with clutch and protective devices
- Type: Mechanical with clutch and protective devices
Hydraulic System
- Pump: Direct drive
- Filter: Replaceable cartridge
- Valves: Electro-hydraulic type
- Control: In-cab multifunctional joystick
- Pump: Direct drive
- Filter: Replaceable cartridge
- Valves: Electro-hydraulic type
- Control: In-cab multifunctional joystick
Impeller
- Features: Easy replaceable blades, heavy-duty spoke type
- Material: Steel (highly abrasive resistant)
- Casing Rotation: Hydraulic
- Features: Easy replaceable blades, heavy-duty spoke type
- Material: Steel (highly abrasive resistant)
- Casing Rotation: Hydraulic
Conveyor
- Features: 2 heavy-duty augers, ice-cutting teeth
- Truck Loading Chute: Hydraulically controlled
- Horizontal Rotation Angle: 300°
- Casting Distance: 1.2 m (4 ft.) to 15 m (50 ft.)
- Telescopic Section: 472 mm (18 inches) (optional)
- Features: 2 heavy-duty augers, ice-cutting teeth
- Truck Loading Chute: Hydraulically controlled
- Horizontal Rotation Angle: 300°
- Casting Distance: 1.2 m (4 ft.) to 15 m (50 ft.)
- Telescopic Section: 472 mm (18 inches) (optional)
Options
- Female quick attach
- Hydraulic steering vanes
- Adjustable impeller casing cast angle: Flat from right to 30° left
- Carbide type components: Impeller casing, loading chute, scraper blade, skates
- High resistance rubber scraper blade
- Replaceable conveyor ice cutting teeth
- Battery charger and/or heater
- Trumpet horn
- Telescopic loading chute
- Right side hydraulic tilting chute
- Female quick attach
- Hydraulic steering vanes
- Adjustable impeller casing cast angle: Flat from right to 30° left
- Carbide type components: Impeller casing, loading chute, scraper blade, skates
- High resistance rubber scraper blade
- Replaceable conveyor ice cutting teeth
- Battery charger and/or heater
- Trumpet horn
- Telescopic loading chute
- Right side hydraulic tilting chute
Notes
- Performance is theoretical and depends on snow conditions.
- Dimensions vary with options and are measured without fuel.
- Specifications may change without prior notice due to continuous improvement.
- Performance is theoretical and depends on snow conditions.
- Dimensions vary with options and are measured without fuel.
- Specifications may change without prior notice due to continuous improvement.
Contact Information
- Manufacturer: J.A. Larue Inc.
- Address: 660, Lenoir, Québec, Canada G1X 3W3
- Phone: 418-658-3003
- Toll-Free: 1-877-658-3013
- Fax: 418-658-6799
- Website: www.jalarue.com
- Email: [email protected]
- Manufacturer: J.A. Larue Inc.
- Address: 660, Lenoir, Québec, Canada G1X 3W3
- Phone: 418-658-3003
- Toll-Free: 1-877-658-3013
- Fax: 418-658-6799
- Website: www.jalarue.com
- Email: [email protected]
See more
Catalog excerpts
Detachable snouiblouier
Open the catalog to page 1
Detachable snoLubloiuer Options Capacity: up to 2,750 tons/hour Casting distance: up to 46 m (150 ft.) Dimensions2 Length from attach plate to front: 2,083 mm (82 in.) Overall width: 2,800 - 2,900 mm (110 - 114 in.) Overall height3: 3,530 - 3,990 mm (139 - 157 in.) Working height: 1,400 mm (55 in.) Weight2: 4,445 kg (9,800 lb) Female quick attach Hydraulic steering vanes Impeller casing having a 150° adjustable cast angle: Flat from the right to 30° to the left. Carbide type: impeller casing, loading chute, scraper blade and/or skates High resistance rubber scraper blade Replaceable conveyor...
Open the catalog to page 2All Larue catalogs and technical brochures
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.