D35
D35
Capacity: The equipment can handle up to 1,800 tons per hour with a casting distance reaching up to 46 meters (150 feet).
Dimensions
Length from attach plate to front: 1.94 meters (76.5 inches)
Overall width: 2.6 meters (102 inches)
Overall height: 3.28 meters (129 inches)
Working height: 1.32 meters (52 inches)
Weight: 2,722 kg (6,000 lb), varies with options and measured without fuel.
Engine
Type: Cummins T4F
Power: 129 kW (173 hp)
Driveline System
Mechanical type equipped with clutch and protective devices.
Hydraulic System
Pump: Direct drive
Filter: Replaceable cartridge
Valves: Electro-hydraulic type
Control: In-cab multifunctional joystick
Impeller
Features easy replaceable blades and a heavy-duty spoke type. The casing is made of highly abrasive-resistant steel with hydraulic rotation.
Conveyor
Type: Ribbon (serrated)
Diameter: 813 mm (32 inches)
Truck Loading Chute
Hydraulically controlled with a horizontal rotation angle of 300°. Casting distance ranges from 1.2 meters (4 feet) to 15 meters (50 feet). An optional telescopic section of 762 mm (30 inches) is available.
Options
Includes female quick attach, hydraulic steering vanes, adjustable impeller casing, carbide type components, residential type muffler, high resistance rubber scraper blade, replaceable conveyor ice cutting teeth, battery charger/heater, trumpet horn, telescopic loading chute, wireless controls, and full skid width.
Notes
Performance is based on mathematical calculations and varies with conditions such as snow, altitude, winds, temperature, fuel, wear parts, operator, unit configuration, and vehicle speed. Specifications and appearances may change without notice.
For more information, contact J.A. Larue Inc. or your local distributor.
Catalog excerpts
Capacity: up to 1,800 tons/hour Casting distance: up to 46 m (150 ft.) Length from attach plate to front: 1.94 m (76.5 in.) Overall width: 2,6 m (102 in.) Overall height: 3,28 m (129 in.) Working height: 1,32 m (52 in.) Weight 2: 2,722 kg (6,000 lb) Engine Cummins T4F Power: 129 kW (173 hp) Driveline system Mechanical type equipped with clutch and protecting devices. Options Female quick attach Hydraulic steering vanes Impeller casing having a 150° adjustable cast angle: Flat from the right to 40° to the left. Carbide type: impeller casing, loading chute, scraper blade and/or skates Residential type muffler High resistance rubber scraper blade Replaceable conveyor ice cutting teeth Battery charger and/or battery heater Trumpet horn Telescopic loading chute Wireless controls Full skid width Notes: 1. The performances are based on mathematic calculations and they depend on conditions such as snow, altitude, winds, temperature, fuel, wear parts, operator, unit configuration and vehicle speed. 2. Varies with options, measured without fuel. Hydraulic system Pump: direct drive Filter with replaceable cartridge Valves electro-hydraulic type Controlled by in-cab multifunctional joystick Conveyor Type: Ribbon (serratted) Diameter: 813 mm (32 in.) Truck loading chute Hydraulically controlled Horizontal rotation angle: 300° Casting distance: 1.2 m (4 ft.) to 15 m (50 ft.) Telescopic section of 762 mm (30 in.) (optional) Due to continuous improvement, the specifications and appearances in this brochure may change without prior notice. For more information, please contact the manufacturer J.A. Larue Inc. or your local distributor. Deposit brand 1999, all right reserved | Manufactured by: J.A. Larue Inc. 660, Lenoir, Québec (Québec) Canada G1X 3W3 Tel: 418-658-3003 | Toll free: 1-877-658-3013 | Fax: 418-658-6799 Web site:www.jalarue.com | E-mail:[email protected] Your authorized distributor: Easy replaceable blades Heavy duty spoke type Impeller casing made of steel (highly abrasive resistant) Hydraulic impeller casing
Open the catalog to page 1
