standard features • Heavy duty floor standing base with integrally mounted drive motor, reduction gearbox. • Heavy duty work table, vertically adjustable. • hree conditioning rings, with T adjustable, Zytel roller bearing yoke assemblies to maintain lap flatness. • ree standing abrasive system F complete with pump and multiple point compound distribution. • igh torque drive unit consisting of H 1.5kW motor and reduction gearbox. Lap plate speed 70 rpm. • perator controls at 110V, complies O with EN 60 204. • E compliant. C The Lapmaster Model 24 is the smallest floor standing lapping machine in the range and is ideal for engineering workshops, where flatness and finish are of prime importance. It is equipped with a 610mm diameter serrated lap plate, manufactured from Grade 300 grey cast iron to ISO 185(2005) as standard. Other plates can be supplied on request. The machine is self contained and the rigid welded tubular section steel frame supports the reduction gearbox and drive motor and houses the abrasive compound system and the waste tank. Access to these is provided by lift off panels. The machine is intended for use with free abrasive compounds. A dispensing system, for use with water and diamond compounds etc., can also be fitted. Flatness of the machines lap plate, and consequently of the component, is controlled by adjusting the position of the conditioning rings relative to the lap plate track. The lapping plate drive system uses a separate motor and worm & wheel mechanical reduction gearbox with single belt drive. • Waste tank. standard tooling • High density, cast iron serrated lap The Lapmaster model 24 can be used to process a wide variety of materials including semiconductors, electro optics, ceramics, metals and many other specialty products. • Three high density cast iron serrated This floor standing machine is also available in a pneumatic lift version. Please see appropriate datasheet, available on request. • hree blank workholder discs. T International Lapping and Polishing Machine Systems www.lapmaster.co.uk • perator panel with start / stop O controls, and multiple range digital process timer. • hree pressure weights. T • hree felt pads. T • ap plate lifting tool. L • Operation and maintenance manual.

OPTIONAL tooling • latness gauge. F • olid stainless steel backing plates. S • omposite faced plates. C • olid cast iron lap plate. S OPTIONAL FEATURES • Four ring model. • Pneumatic lift version. • lectronic variable speed drive. E • lectronic soft start to main drive. E • Water cooled lap plate. • Non-standard voltages. • Stainless steel wetted parts. • Peristaltic pump. • Corporate colours. • Fixed or light beam guarding. Lapmaster International Ltd International Lapping and Polishing Machine Systems Lee Mill Industrial Estate, Ivybridge, Devon, PL21 9EN UK T: + 44 (0)1752 893191 F: + 44 (0)1752...