Lantor Coremat® • The cost effective solution for your open mould process • Lantor Coremat® can be used as core material and/or print blocker • Lantor Coremat® is a polyester nonwoven and compatible with all regular types of resins, including Polyester,Vinylester, Phenolic and Epoxy. • Lantor Coremat® is suitable for hand lay-up and spray-up processes. Applications of Lantor Coremat® • Marine (hulls, decks and superstructures of boats and yachts) • Transportation (parts and panels of cars, trailers, trucks, RV's) • Mass transit (interior and exterior of trains, light rail, buses) • Leisure (kayaks, surfboards, pools, tubs) • Industrial (cladding panels, containers, tanks) • Wind Energy (nacelle covers, spinners) The information contained in this document has been compiled in good faith by Lantor B.V., but nevertheless no representation or warranty is given as to the accuracy or completeness of the (technical) information provided herein. Please note, the data presented in this document are typical values only, and should not be used as specification or engineering data. Lantor B.V. can not be held liable for any damages arising from any (printing) errors or omissions in this information. Lantor B.V reserves the right to make changes with respect to the information provided at any time without further notice. he Netherlands E-mail: [email protected] Or visit our website: www.lantor.nl print through mould processes • Honeycomb structure • Extra resin saving • Optimal balanced • World benchmark