*mydirectindustry

TE-B

TE-B

Product catalog summary

Overview: The document provides technical specifications and features of three tray erector models: TE-B300, TE-B350, and TE-B400. These machines are designed for high reliability, efficiency, and productivity with a compact footprint and operator-friendly features.

Key Features:

High reliability and efficiency with a compact design.
Ergonomic magazine design for easy loading of blanks.
Linear adjustment wheels, counters, and setup lists for easy adjustments.

Operation Process:

Blank Pick-Up: Blanks are taken from the magazine using vacuum and positioned for forming.
Adjustable Forming Unit: The folding unit is adjustable in length and width to accommodate different tray sizes, with adjustments made via hand wheels and readable from counters and scales.
Square Tray Forming: Blanks are pressed through the forming unit, with sides folded and glued on four sides.
Flexibility: Modular configuration allows handling of various display tray formats and shapes.

Technical Specifications:

Tray Dimensions: All models support tray lengths from 280 mm to 600 mm, widths from 200 mm to 400 mm, and varying heights.
Tray Quality: Supports B-wave, C-wave, and E-wave corrugation.
Capacity: TE-B300 produces 10 trays per minute, TE-B350 produces 8 trays per minute, and TE-B400 produces 6 trays per minute, with higher capacities available.
Tray Closure: Uses hotmelt for tray closure.
Operating Conditions: Suitable for dry environments with temperatures between +3°C and +40°C.
Power and Air Requirements: Requires a 3 x 400 V - 50Hz - N-earthed electrical connection and 6 bar air pressure with a ½” compressed air connection.

Catalog excerpts

TE-B300 Tray Erector Display Tray S High reliability, efficiency & productivity S Compact, small footprint S Operator friendly: S Ergonomic design of the magazine allows easy loading of blanks S Linear adjustment wheels, counters and setup list make it easy to carry out adjustments ADJUSTABLE FORMING UNIT From the magazine a blank is taken with vacuum and put in position. Four snap-lock clips transport the bl ank to the forming head position. The folding unit is adjustable in length and width and can be adjusted to the correct tray size. The adjustmen ts are d one by hand w heels and can easily be read from counters and measuring scales. SQUARE TRAY FORMING While the blank is being pressed through the forming unit by the stamp, the sides of the tray are simultaneous folded and glued on 4 sides . FLEXIBLE TO HANDLE DIFFERENT TRAY FORMATS Modular machine configuration to handle display tray formats and shapes that meet your operational needs. Lantech De Hork 42 • 5431 NS CUIJK The Netherlands • +(31) 485-751700 • wwwl&rtehxov

Open the catalog to page 1

TE-B300 Tray Erector Display Tray Technical Specifications Tray dimensions Minimum Tray Length (A) 280 mm Tray quality Corrugation B-wave, C-wave, E-wave Capacity 10 trays per minute (higher capacities available) Tray closure Hotmelt Operation temperature The machine is suitable for operation in Air & power a dry environment at a temperature Electrical connection : 3 x 400 V - 50Hz - N-earthed between +3°C and +40°C

Open the catalog to page 2

TE-B350 Tray Erector Display Tray S High reliability, efficiency & productivity S Compact, small footprint S Operator friendly: S Ergonomic design of the magazine allows easy loading of blanks S Linear adjustment wheels, counters and setup list make it easy to carry out adjustments ADJUSTABLE FORMING UNIT From the magazine a blank is taken with vacuum and put in position. Four snap-lock clips transport the bl ank to the forming head position. The folding unit is adjustable in length and width and can be adjusted to the correct tray size. The adjustmen ts are d one by hand w heels and can easily...

Open the catalog to page 3

TE-B350 Tray Erector Display Tray Technical Specifications Tray dimensions Minimum Tray Length (A) 280 mm Tray quality Corrugation B-wave, C-wave, E-wave Capacity 8 trays per minute (higher capacities available) Tray closure Hotmelt Operation temperature The machine is suitable for operation in Air & power a dry environment at a temperature Electrical connection : 3 x 400 V - 50Hz - N-earthed between +3°C and +40°C

Open the catalog to page 4

TE-B400 Tray Erector Display Tray S High reliability, efficiency & productivity S Compact, small footprint S Operator friendly: S Ergonomic design of the magazine allows easy loading of blanks S Linear adjustment wheels, counters and setup list make it easy to carry out adjustments ADJUSTABLE FORMING UNIT From the magazine a blank is taken with vacuum and put in position. Four snap-lock clips transport the bl ank to the forming head position. The folding unit is adjustable in length and width and can be adjusted to the correct tray size. The adjustmen ts are d one by hand w heels and can easily...

Open the catalog to page 5

TE-B400 Tray Erector Display Tray Technical Specifications Tray dimensions Minimum Tray Length (A) 280 mm Tray quality Corrugation B-wave, C-wave, E-wave Capacity 6 trays per minute (higher capacities available) Tray closure Hotmelt Operation temperature The machine is suitable for operation in Air & power a dry environment at a temperature Electrical connection : 3 x 400 V - 50Hz - N-earthed between +3°C and +40°C

Open the catalog to page 6

All LANTECH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list