*mydirectindustry

TE-A

TE-A

Product catalog summary

Overview: The document provides technical specifications and features of the TE-A100, TE-A200, TE-A300, and TE-A350 Tray Erector machines, designed for high reliability, efficiency, and productivity with a compact footprint and operator-friendly design.

Key Features:

High reliability and productivity with a compact design.
Ergonomic magazine design for easy loading of blanks.
Linear adjustment wheels, counters, and setup lists for easy adjustments.

Operation Process:

Blank Pick-Up: Blanks are taken from the magazine using vacuum and positioned for forming.
Adjustable Forming Unit: The folding unit is adjustable in length and width to accommodate different tray sizes, with adjustments made via hand wheels and readable from counters and scales.
Square Tray Forming: Blanks are pressed through the forming unit, with sides folded and glued on four sides.
Flexibility: Modular configuration allows handling of various tray formats and shapes.

Technical Specifications:

Tray Dimensions: Vary across models, with minimum and maximum lengths, widths, and heights specified for each.
Tray Quality: Supports B-wave, C-wave, and E-wave corrugation.
Capacity: Ranges from 8 to 18 trays per minute, depending on the model.
Tray Closure: Utilizes hotmelt for tray closure.
Operating Conditions: Suitable for dry environments with temperatures between +3°C and +40°C.
Power and Air Requirements: Requires a 3 x 400 V - 50Hz electrical connection and 6 bar air pressure with a ½” compressed air connection.

Catalog excerpts

TE-A100 Tray Erector Basic Tray S High reliability, efficiency & productivity S Compact, small footprint S Operator friendly: S Ergonomic design of the magazine allows easy loading of blanks S Linear adjustment wheels, counters and setup list make it easy to carry out adjustments ADJUSTABLE FORMING UNIT From the magazine a blank is taken with vacuum and put in position. Four snap-lock clips transport the bl ank to the forming head position. The folding unit is adjustable in length and width and can be adjusted to the correct tray size. The adjustmen ts are d one by hand w heels and can easily be read from counters and measuring scales. SQUARE TRAY FORMING While the blank is being pressed through the forming unit by the stamp, the sides of the tray are simultaneous folded and glued on 4 sides . FLEXIBLE TO HANDLE DIFFERENT TRAY FORMATS Modular machine configuration to handle basic tray formats and shapes that meet your operational needs. Lantech De Hork 42 • 5431 NS CUIJK The Netherlands • +(31) 485-751700 • wwwl&rtehxov

Open the catalog to page 1

TE-A100 Tray Erector Basic Tray Technical Specifications Tray dimensions Minimum Maximum Tray quality_ Corrugation B-wave, C-wave, E-wave 18 trays per minute (higher capacities available) Tray closure Hotmelt Electrical connection Air pressure Compressed air connection Operation temperature The machine is suitable for operation in a dry environment at a temperature between +3°C and +40°C Lantech De Hork42 • 5431 NS CUIJKThe Netherlands • +(31) 485-751700 •

Open the catalog to page 2

TE-A200 Tray Erector Basic Tray S High reliability, efficiency & productivity S Compact, small footprint S Operator friendly: S Ergonomic design of the magazine allows easy loading of blanks S Linear adjustment wheels, counters and setup list make it easy to carry out adjustments ADJUSTABLE FORMING UNIT From the magazine a blank is taken with vacuum and put in position. Four snap-lock clips transport the bl ank to the forming head position. The folding unit is adjustable in length and width and can be adjusted to the correct tray size. The adjustmen ts are d one by hand w heels and can easily...

Open the catalog to page 3

TE-A200 Tray Erector Basic Tray Technical Specifications Tray dimensions Minimum Maximum Tray quality_ Corrugation B-wave, C-wave, E-wave Capacity_ 15 trays per minute (higher capacities available) Tray closure Hotmelt Electrical connection Air pressure Compressed air connection Operation temperature The machine is suitable for operation in a dry environment at a temperature between +3°C and +40°C Lantech De Hork42 • 5431 NS CUIJKThe Netherlands • +(31) 485-751700 •

Open the catalog to page 4

TE-A300 Tray Erector Basic Tray S High reliability, efficiency & productivity S Compact, small footprint S Operator friendly: S Ergonomic design of the magazine allows easy loading of blanks S Linear adjustment wheels, counters and setup list make it easy to carry out adjustments ADJUSTABLE FORMING UNIT From the magazine a blank is taken with vacuum and put in position. Four snap-lock clips transport the bl ank to the forming head position. The folding unit is adjustable in length and width and can be adjusted to the correct tray size. The adjustmen ts are d one by hand w heels and can easily...

Open the catalog to page 5

TE-A300 Tray Erector Basic Tray Technical Specifications Tray dimensions Minimum Maximum Tray quality_ Corrugation B-wave, C-wave, E-wave 10 trays per minute (higher capacities available) Operation temperature The machine is suitable for operation in a dry environment at a temperature between +3°C and +40°C Tray closure Hotmelt Air & power Electrical connection : 3 x 400 V - 50Hz - N-earthed

Open the catalog to page 6

TE-A350 Tray Erector Basic Tray S High reliability, efficiency & productivity S Compact, small footprint S Operator friendly: S Ergonomic design of the magazine allows easy loading of blanks S Linear adjustment wheels, counters and setup list make it easy to carry out adjustments ADJUSTABLE FORMING UNIT From the magazine a blank is taken with vacuum and put in position. Four snap-lock clips transport the bl ank to the forming head position. The folding unit is adjustable in length and width and can be adjusted to the correct tray size. The adjustmen ts are d one by hand w heels and can easily...

Open the catalog to page 7

TE-A350 Tray Erector Basic Tray Technical Specifications Tray dimensions Minimum Maximum Tray quality_ Corrugation B-wave, C-wave, E-wave 8 trays per minute (higher capacities available) Tray closure Hotmelt Electrical connection Air pressure Compressed air connection Operation temperature The machine is suitable for operation in a dry environment at a temperature between +3°C and +40°C Lantech De Hork42 • 5431 NS CUIJKThe Netherlands • +(31) 485-751700 •

Open the catalog to page 8

All LANTECH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list