Automatic Case Erectors It’s About the Case Square Cases! ses! No Jams! Square cases are the key to successful ul secondary packaging. ng. Lantech Case Erectors ors are the key to square re cases. Why Square Cases Matter Square cases pack better, stack better, and protect better. They provide the structural integrity to deliver the performance their designer intended. Fact: cases lose 30% of their stacking strength if their sides are not aligned. How Lantech Case Erectors Make Square Cases From the moment a blank enters the magazine until it exits the case erector as a properly formed and bottom sealed case, it is under complete control. There are barriers to erecting square cases. Thinner corrugated, temperature and humidity changes, and variations in case blanks can cause cases to be “unsquared” or lead to machine jams. Lantech Case Erectors overcome these barriers through precise case management and 100% control of cases throughout the entire erecting process, ensuring your cases perform as designed and are produced with maximum efficiency. Square cases work better! 90 o Angles on all four sides! A unique pickup frame pulls the case from the magazine and forces it to open so it is square. The flaps are folded before the case moves, making it rigid and locking in its “squareness.” A pusher bar, parallel to the rear wall, delivers it to spring-loaded side belts, which move in or out to compensate for variations in width, and carry it over the sealing device.

Precision + Control = Square Cases Ergonomic Blank Loading Easy to load magazine. Replenish blanks while machine operates. Simple and fast magazine adjustments. Blank Delivery Control Powered belts precisely govern the delivery speed of the case blanks. Blank retainers ensure the blanks are spaced correctly. Blank Separation Special separators release only the leading blank to the pickup frame and retain the following blanks. Square Case Erecting Eight vacuum powered suction cups hold the blank in the correct position after it leaves the magazine. Both leading panels are held securely. Stationary...