Catalogs >
LANTECH >
Modular Case Erector

Modular Case Erector
1 / 2Pages

Catalog excerpts

Automatic Case Erectors It’s About the Case Square Cases! are No Jams! ams! Square cases are ases the key to successful o secondary packaging. ry Lantech Case Erectors are the key to square cases. Tape Version Shown Also Available as Hotmelt Version Why Square Cases Matter Square cases pack better, stack better, and protect better. They provide the structural integrity to deliver the performance their designer intended. Fact: cases lose 30% of their stacking strength if their sides are not aligned. How Lantech Case Erectors Make Square Cases From the moment a blank enters the magazine until it exits the case erector as a properly formed and bottom sealed case, it is under complete control. There are barriers to erecting square cases. Thinner corrugated, temperature and humidity changes, and variations in case blanks can cause cases to be “unsquared” or lead to machine jams. Lantech Case Erectors overcome these barriers through precise case management and 100% control of cases throughout the entire erecting process, ensuring your cases perform as designed and are produced with maximum efﬁciency. Square cases work better! 90 o Angles on all four sides! A unique pickup frame pulls the case from the magazine and forces it to open so it is square. The ﬂaps are folded before the case moves, making it rigid and locking in its “squareness.” A pusher bar, parallel to the rear wall, delivers it to spring-loaded side belts, which move in or out to compensate for variations in width, and carry it over the sealing device.

Open the catalog to page 1

Blank Separation Special separators release only the leading blank to the pickup frame and retain the following blanks. Specifications Blank Magazine Flap Compressor (Hotmelt Model) or Tape Head Lantech North America • 11000 Bluegrass Parkway • Louisville, KY 40299 • +502 815 9109 Lantech Europe • de Hork 42. • 5431 NS Cuijk The • Netherlands • +31 (0)485 751 760 Lantech Asia Pacific • 86 Wedgewood Road • Hallam, VIC 3803 • Australia • +61 3 9796 5275 Lantech China • Suit 13E2 Shanghai Industri

Open the catalog to page 2