Catalogs >
LANTECH >
Inline Case Erector

Inline Case Erector
2Pages

Catalog excerpts

Automa c Inline Case Erectors It’s About the Case Square Cases! No Jams! Square cases are the key to successful secondary packaging. Lantech Case Erectors are the key to square cases. Tape Version Shown Also Available as Hotmelt Version Why Square Cases Ma er Square cases pack be er, stack be er, and protect be er. They provide the structural integrity to deliver the performance their designer intended. Fact: cases lose 30% of their stacking strength if their sides are not aligned. There are barriers to erec ng square cases. Thinner corrugated, temperature and humidity changes, and varia ons in case blanks can cause cases to be “unsquared” or lead to machine jams. Lantech Case Erectors overcome these barriers through precise case management and 100% control of cases throughout the en re erec ng process, ensuring your cases perform as designed and are produced with maximum efﬁciency. Square cases work be er! How Lantech Case Erectors Make Square Cases From the moment a blank enters the magazine un l it exits the case erector as a properly formed and bo om sealed case, it is under comp plete control. 90 o Angles on all four sides! A unique pickup frame pulls the case from the magazine and forces it to open so it is square. The ﬂaps are folded before the case moves, making it rigid and locking in its “squareness.” A pusher bar, parallel to the rear wall, delivers it to spring-loaded side belts, which move in or out to compensate for varia ons in width, and carry it over the sealing device. CI-1000/CI-2000

Open the catalog to page 1

Easy to load magazine. Replenish blanks while machine operates. Simple and fast magazine adjustments. Blank Delivery Control Powered belts precisely govern the delivery speed of the case blanks. Blank retainers ensure the blanks are spaced correctly. Blank Separation Special separators release only the leading blank to the pickup frame and retain the following blanks. Square Case Erecting Six vacuum powered suction cups hold the blank in the correct position after it leaves the magazine. Both leading panels are held securely. Stationary Flap Folding Once the case is square, it remains...

Open the catalog to page 2