Automa c Case Sealers It’s About the Case Square Cases! No Jams! Square cases are the key to successful secondary packaging. Lantech Case Sealers are the key to square cases. Tape Version Shown Also Available as Hotmelt Version Why Square Cases Ma er Square cases pack be er, stack be er, and protect be er. They provide the structural integrity to deliver the performance their designer intended. How Lantech Case Sealers Make Square Cases Fact: cases lose 30% of their stacking strength if their sides are not aligned. Controling the case throughout the sealing process is the secret to keeping the case square. There are barriers to erec ng square cases. Thinner corrugated, temperature and humidity changes, and varia ons in case blanks can cause cases to be “unsquared” or lead to machine jams. Lantech case sealers establish control immediately when the case enters the machine into spring loaded side belts. Lantech Case Sealers overcome these barriers through precise case management and 100% control of cases throughout the en re sealing process, ensuring your cases perform as designed and are produced with maximum efficiency. Square cases work be er! Our 2 stage flap folding system ensures the leading top flap folds at the score line. Stage 2 folds the flap perpendicular to the case so the top side flaps will be horizontal when they are closed. The trailing top flap is precisely folded, wherea er the long flap folding system folds the top side flpas and hold them down to be sealed in that posi on. Lantech case sealers preserve the effort and investment you have made in sealing a case properly. CS-1000

CONTROLLED CASE TRANSPORT Spring loaded side belts take over the case at the infeed side. The spring load functionality deals with tolerances in case width. Wide and thin corrugated cases can be handled because of pre folding the first short flap. This helps avoiding packaging damage and improves the reliability of your packaging process. TOP CLOSING The side belts transport the case underneath special designed stainless steel curves. Due to the movement the long flaps close perfectly. TAPE CLOSING VERSION In the top closing section the case is kept under control during taping of the top flaps....