*mydirectindustry

Catalogs
LANTECH
C-300/C-400

C-300/C-400

Product catalog summary

Introduction
Lantech's C-300 and C-400 Automatic Case Erectors are designed to produce square cases, which are crucial for effective secondary packaging. Square cases enhance packing, stacking, and protection, maintaining structural integrity and performance.

Importance of Square Cases
Square cases are essential as they retain 30% more stacking strength compared to misaligned cases. Challenges such as thinner corrugated materials, environmental changes, and case blank variations can lead to unsquared cases and machine jams. Lantech's technology ensures precise case management and control throughout the erecting process, overcoming these barriers.

Case Erecting Process
The process begins with a blank entering the magazine and ends with a fully formed and sealed case. A unique pickup frame ensures the case opens squarely, with flaps folded to maintain rigidity. A pusher bar and spring-loaded side belts adjust for width variations, ensuring consistent squareness.

Features

Ergonomic Blank Loading: Easy magazine loading and adjustments while the machine operates.
Blank Delivery Control: Powered belts and retainers ensure precise blank spacing and delivery.
Blank Separation: Special separators manage the release of blanks to the pickup frame.
Square Case Erecting: Vacuum suction cups hold the blank securely for accurate positioning.
Stationary Flap Folding: Ensures the case remains square by folding flaps while stationary.
Square Case Transition: Pusher bar and side belts maintain case squareness during sealing.

Specifications

Criteria	C-300 TAPE	C-400 TAPE
Speed	10 cases per minute	8 cases per minute
Minimum Case Dimensions	200 mm L x 150 mm W x 150 mm C	200 mm L x 150 mm W x 250 mm C
Maximum Case Dimensions	500 mm L x 350 mm W x 600 mm C	620 mm L x 450 mm W x 650 mm C
Case Type	RSC, HSC, FEFCO 0200/0201	RSC, HSC, FEFCO 0200/0201
Flute Type	B, C	B, C
Wall Type	Single Wall	Single Wall
Standard Sealing Device	Lantech® TH-Series Tape Head	Lantech® TH-Series Tape Head
Machine Dimensions	2140 mm L x 2235 mm W x 1600 mm H	2310 mm L x 2375 mm W x 1600 mm H
Machine Weight	525 kg	575 kg
Electrical Service Choices	3L-PE-400V-50Hz-Neutral	3L-PE-400V-50Hz-Neutral
Pneumatics	6 Bar (80 PSI)	6 Bar (80 PSI)

Conclusion
Lantech's C-300 and C-400 Case Erectors provide precision and control to ensure square cases, enhancing packaging efficiency and effectiveness.

Catalog excerpts

Automatic Case Erectors It’s About the Case Square Cases! ses! No Jams! Square cases are the key to successful ul secondary packaging. ng. Lantech Case Erectors ors are the key to square re cases. Why Square Cases Matter Square cases pack better, stack better, and protect better. They provide the structural integrity to deliver the performance their designer intended. Fact: cases lose 30% of their stacking strength if their sides are not aligned. How Lantech Case Erectors Make Square Cases From the moment a blank enters the magazine until it exits the case erector as a properly formed and bottom sealed case, it is under complete control. There are barriers to erecting square cases. Thinner corrugated, temperature and humidity changes, and variations in case blanks can cause cases to be “unsquared” or lead to machine jams. Lantech Case Erectors overcome these barriers through precise case management and 100% control of cases throughout the entire erecting process, ensuring your cases perform as designed and are produced with maximum efﬁciency. Square cases work better! 90 o Angles on all four sides! A unique pickup frame pulls the case from the magazine and forces it to open so it is square. The ﬂaps are folded before the case moves, making it rigid and locking in its “squareness.” A pusher bar, parallel to the rear wall, delivers it to spring-loaded side belts, which move in or out to compensate for variations in width, and carry it over the sealing device.

Open the catalog to page 1

Precision + Control = Square Cases Ergonomic Blank Loading Easy to load magazine. Replenish blanks while machine operates. Simple and fast magazine adjustments. Blank Delivery Control Powered belts precisely govern the delivery speed of the case blanks. Blank retainers ensure the blanks are spaced correctly. Blank Separation Special separators release only the leading blank to the pickup frame and retain the following blanks. Square Case Erecting Eight vacuum powered suction cups hold the blank in the correct position after it leaves the magazine. Both leading panels are held securely. Stationary...

Open the catalog to page 2

C-300/C-400

C-300/C-400

Catalog excerpts

All LANTECH catalogs and technical brochures