TPWMR-5006
9Pages

EN50155 Multifunction Router + PoE Switch Lantech' Pioneering Industrial and IP Networks TPWMR-5006- EN50155 Multifunction VPN Router w/1x WiFi 11ac + 1 LTE 4G serial ports + 6 Gigabit X-coded Ethernet switch (incl. 4 PoE ports) w/ Load Balancing**, TWCC**, VPN, Protocol Gateway, Storage**; WV input ■ Built-in 6 Gigabit X-coded Ethernet managed switch w/4 PoE at/af Switch at 60W budget ■ WIFI radio for 802. Ilac/a/b/g/n with 5GHz or 2.4GHz ■ Support WIFI 802. lie traffic prioritization and WMM ■ MIMO technology 3T3R up to 6 antenna; Detachable antenna connectors with 6 SMA/QMA** type incl. 3 WIFI + 3 LTE ■ Fast roaming **, 802.11r work with Lantech controller ■ Supports AP/ BRIDGE/Client modes ■ Advanced wireless security WEP64/128bits/ WPAJ WPA-PSK (TKIP*,AES)/ WPA2J WPA2-PSK (TKIP*,AES) ■ Optional TWCC** (Train Wireless Carriage Coupling)for auto wireless coupling ■ VPN router for Multi-site VPN, Open VPN, L2TP, IPsec, PPTP**, L2 over GRE ■ Load Balancing** support 8 mechanism ■ Optional EMMC Flash storage on-board** ■ Support Modbus gateway on serial ports ■ Support 2 RS422/485 ports with 2.5KVisolation or 2x RS232 ports ■ Optional 2 GT smart bypass protection ■ Galvanic isolation on WV model from 16.8V~137.5V input ■ Environmental monitoring for router inside info with voltage, current, temperature and total PoE load;; WIFI & LTE graphic signal strength & TX/RX rate display ■ Editable login page of captive portal for hot-spot application ■ USB port to backup, restore the configuration file and upgrade firmware*; Dual image firmware* OVERVIEW Lantech TPWMR-5006 series is a next generation EN50155 multi-function VPN router w/ 1 x 802.3ac Wi-Fi + 1 x LTE modem +6 Gigabit X-coded Ethernet switch incl. 4 PoE ports + 2 serial ports that supports advanced function of VPN, Load-balancing**(Premium pack), EMMC Flash Storage**, TWCC**, Protocol gateway(Modbus), Storage**, Wi-Fi roaming** and LTE dual SIM fail-over for industrial applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly. Optional TWCC** (Train Wireless Carriage Coupling) for auto discovery, redundant ring & auto coupling TPWMR-5006 supports series supports optional TWCC** (Train Wireless Carriage Coupling) that enables auto wireless coupling to reconnect APs. LTE design 4G/3G w/2SIMs for redundancy With one mobile LTE module (1L model), 2 SIM card slots, TPWMR-5006 provides redundant link between two service providers. Both GPS and Russian GLONASS systems are supported. Optional EMMC Flash storage** The optional EMMC flash storage on router can offer 8G/16G/32G capacity. IEEE 802.11ac one band radio up to 1.3GMbps bandwidth With IEEE 802.11ac capability, TPWMR-5006 can operate either 5GHz or 2.4GHz bands, offering the maximum speed of 1.3GMbps bandwidth it is also compatible with 802.11g/n that can work with 2.4GHz for longer range transmission. MIMO technology with 3T3R and standard SMA / optional Datasheet Version 5.7 www.lantechcom.tw | info@lantec

Lantech' Pioneering Industrial and IP Networks Load* WAN link with highest free bandwidth ratio. The ratio = 1 - (traffic load / the capability of a Wan link). The traffic load could be defined by downstream, upstream or total traffic Fastest* Routes connections through the WAN link with lowest latency time. QMA type connectors Lantech TPWMR-5006 series adapts MIMO technology with smart antenna transmission and reception for 3T3R. With six external detachable antenna SMA/QMA** connectors and optional antennas, TPWMR-5006 can have better Wi-Fi & LTE/GPS coverage. Optional 802.11r fast...

Lantech' Pioneering Industrial and IP Networks Environmental monitoring for inside router info& alerting; Graphic WiFi & LTE signal strength and TX/RX rate display The built-in environmental monitoring can detect router ambient temperature, voltage, current and total PoE load where can send the syslog, email** and SMS** alert when abnormal. The graphic WIFI & LTE signal strength and TX/RX rate display shows connection status at a glance Built-in Managed Switch Function Managed switch function is built-in and provides various L2+ functions for network access deployment. It delivers ports...

Lantech' Pioneering Industrial and IP Networks Basic Package ■ Built-in 2 x serial ports(RS232/RS422/485) ■ Serial port with 2.5KV isolation on RS422/485 ■ Supports 2DI / 2DO(Digital Input / Output) ■ Built-in Modbus gateway converting Modbus RTU/ASCII to Modbus/TCP for serial ports ■ Event alerting by Syslog, Email**, SMS** text, Relay ; Permanent local log rotation / Maxi 1K records ■ Remote Web/SMS** control to get status or re-boot by Web or SMS** ■ Support SNTP to synchronize system clock ■ Support LLDP discovery protocol ■ Support DHCP Server and Client ■ Graphic LTE & WIFI signal...

EN50155 Multifunction Router + PoE Switch Lantech" Pioneering Industrial and IP Networks 'Note: I he component r red color only appears on IP65-rated models. WLAN Interface Encryption Security Wireless Security Location Solutions Band Options Cellular Interface GPS, Glonass (EU/Americas) GPS, Glonass, Beidou, Galileo (APAC model only) APAC & Australia (APAC model) LTE: 2100/1800/850/2600/900/850/850/1500/700/2600/19 00/2300/2500 MHz (B1 /B3/B5/B7/B8/B18/B19/B21 /B28/B38/B39/B40/B4 1)

EN50155 Multifunction Router + PoE Switch 2100/1800/2600/900/800 MHz (B1/B2/B3/B4/B5/B7/B12/B13/B20/B25/B26/B29/B30 /B41) IEEE 802.1ab Link Layer Discovery Protocol (LLDP) Device cold / warm start Port link up / link down DI / DO high / low WorldWide (WW model) LTE: 2100/1900/1800/1700/850/2600/900/1800/700/700/8/ 50/850/800/850/700/2300/1500/2500/3500/3700/520 0/3600/1700 (B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B18/B19/B20/B 26/B28/B29/B30/B32/B41/B42/B43/B46/B48/B66) Data Rates – LTE Discovery SNMP trap Environmental Monitoring System status for input voltage, current , ambient temperature to be...

Lantech' Pioneering Industrial and IP Networks Railway verification 'Future Release "Optional