IPES-5416T-16
7Pages

{{requestButtons}}

Catalog excerpts

IPES-5416T-16 - 1

Industrial PoE Managed Switches / EN50155 Switches incl. detection and scheduling ■ Optional 24V input boost to 48V output for IEEE802.3at/af max. 120W ■ Optional 72V input steps down to 48V output for IEEE 802.3at/af max.120W ■ Optional 110V input to 48V output for IEEE 802.3at/af max.90W ■ Enhanced G.8032 ring protection < 20ms with easy configuration; Train ring for dynamic coupling ring; Aggregation ring* ■ Support PTPv2 <1us, relay contact & environmental monitoring ■ Miss-wiring avoidance; Repowered auto ring restore (node failure protection) ■ IP67/ IP43 housing; User friendly UI, including auto topology drawing; Complete CLI ■ Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82 for Port& VLAN based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH/SSL, TACAS+*, HTTPS, ACL, IPv6, SMS ■ N-key configurator** for upgrading, auto/editable configuration back up and restoration without OVERVIEW Lantech IPES-5416T-16 (IP67/IP43) is a high performance L2+ (Gigabit uplink) switch with 16 10/100TX + 4 10/100/1000T w/16 PoE 802.3af/at Injectors by M12 provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms including train coupling ring, enhanced mode for easy configuration and aggregation ring*, comprehensive QoS, QoS by VLAN, advanced security including ACL L2/L3, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ* (double tag VLAN) which are important features required in train and large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and show on L2 map topology. Lantech IPES-5416T-16 (IP67/IP43) features hardware-based PTP IEEE1588 v2 function which can allow 4 10/100/1000T uplinks to synchronize the network with precise accuracy (under 1Ms). Lantech IPES-5416T-16 (IP67/IP43) supports IEEE802.3at/af standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc. The advanced PoE management includes PoE detection and scheduling besides the regular PoE per port status. PoE detection can detect if the connected PD is hang up then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Per port PoE status can remotely On/Off the power and display information of voltage, current, watt and PoE temperature. The Lantech IPES-5416T-16 (IP67/IP43) is designed with dual power input at 24/48VDC input while as 72V model can take dual 72V input to feed 48V PoE. The 110V model can accept dual 110V to feed 48V POE at PoE budget max 90W. Featured with relay contact alarm function, the IPES-5416T-16 (IP67/IP43) is able to connect with alarm system in case of power failure or port disconnection events. The IPES-5416T-16

Open the catalog to page 1
IPES-5416T-16 - 2

lantEch" Pioneering Industrial and IP Networks Industrial PoE Managed Switches / EN50155 Switches (IP67/IP43) also provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet. The IPES-5416T-16 (IP67/IP43) also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IPES-5416T-16 (IP67/IP43) is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function...

Open the catalog to page 2
IPES-5416T-16 - 3

lantEch" Pioneering Industrial and IP Networks Industrial PoE Managed Switches / EN50155 Switches scheduling for PD (power devices) 24V model can accept dual 24V power input and boost to 48V for PoE 802.3at/af max 120W budget 72V model can accept dual 50.4~90V power input and feed 48V for PoE at/af at max 120W budget 110V model can accept dual 77V~137.5V input and feed 48V for PoE at/af at max 90W budget IEEE 1588 PTP v2 (under 1 ^s) N-key** configurator for firmware upgrade, auto/editable configuration back up and restoration Back-plane (Switching Fabric): 11.2Gbps 16K MAC address...

Open the catalog to page 3
IPES-5416T-16 - 4

Industrial PoE Managed Switches / EN50155 Switches DIMENSIONS (unit=mm) IP67 model SPECIFICATION Hardware Specification Standards Switch Architecture Transfer Rate CPU RAM Flash Mac Address Jumbo frame Connectors IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX IEEE802.3z Gigabit fiber IEEE802.3x Flow Control and Back Pressure IEEE802.3ad Port trunk with LACP IEEE802.1d Spanning Tree IEEE802.1w Rapid Spanning Tree IEEE802.1s Multiple Spanning Tree IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.1AB Link Layer Discovery Protocol (LLDP) IEEE 802.1X User Authentication...

Open the catalog to page 4
IPES-5416T-16 - 5

Industrial PoE Managed Switches / EN50155 Switches PoE pin RJ-45 port # 1~#16 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides 30W at 54~56VDC/15W at 48V~56VDC. Quality of Service Class of Service Positive (VCC+): RJ-45 pin 1,2. Power Consumption Case Dimension Stability Testing MTBF Certifications& report Negative (VCC-): RJ-45 pin 3,6. Max. 13W 24V~48VDC input Max. 16W 72VDC/ 110VDC input IP67 model: Aluminum case 285mm(W)x200mm(H)x84.4mm(D) IP43 model: Aluminum case 273mm(W)x187mm(H)x84.4mm(D) 2.1kgs(IP67); 1.8kgs (IP43) DIN Rail** and Wall Mount Design FCC Class...

Open the catalog to page 5
IPES-5416T-16 - 6

lantEch" Pioneering Industrial and IP Networks Industrial PoE Managed Switches / EN50155 Switches **Optional 16 10/100TX 12 PoE at/af up to 30W + 4 Giga T PTP L2+ Managed Industrial PoE M12 IP67 Switch; -40°C to 75°C RJ45 connector dongle for firmware upgrade, auto/editable configuration backup and restoration; -20°C to 60°

Open the catalog to page 6
IPES-5416T-16 - 7

Industrial PoE Managed Switches / EN50155 Switches OPTIONAL ACCESSORIES M12/M23 Connector & Cable  ECONM23-5P(F)70CM CABLE  ECAB124030MJS M23 power cable 90 degree angle, 70cm, 5 pin 4 Pin M12 RJ45 Male 3 Meters; STP Cable Lantech Communications Global Inc. www.lantechcom.tw info@lantechcom.tw © 2014 Copyright Lantech Communications Global Inc. all rights reserved. The revise authority rights of product specifications belong to Lantech Communications Global Inc. Lantech may make changes to specification and product descriptions at anytime, without notice.

Open the catalog to page 7

All Lantech Communications Europe GmbH catalogs and technical brochures

  1. IES-0016

    3 Pages

  2. IGS-0008B

    3 Pages

  3. IGS-0204DSFP

    2 Pages

  4. IGS-0208GSFP

    3 Pages

  5. IGS-0016

    3 Pages

  6. IGS-6416XSFP

    6 Pages

  7. TPES-5424T

    6 Pages

  8. TWMR-5002

    9 Pages

  9. TWMR-5004

    9 Pages

  10. TWMR-5006

    9 Pages

  11. TPWMR-5004

    9 Pages

  12. TPWMR-5006

    9 Pages

  13. IGS-3408DSFP

    5 Pages

  14. IPES-5416T-8

    7 Pages

Archived catalogs

  1. Catalogue 2010

    46 Pages