IPES-3424DSFP-2P
6Pages

Industrial PoE Managed Switches IPES-3424DSFP-2P24 10/100TX PoE + 4 DualSpeed SFP Industrial L2+ Switch w/ enhanced G.8032 Ring ■ High-density 10/100TX L2+ managed PoE at/af switch ■ Enhanced G. 8032 ring protection < 20ms with easy configuration; Dynamic coupling ring; Aggregation ring* ■ Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82 for Port&VLAN based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH/SSL, TACAS+*, HTTPS, ACL, IPv6, SMS Support relay contact DIDO & Environmental Monitoring for real time voltage, current, total PoE load and case ambient temperature Miss-wiring avoidance & Repowered auto ring restore User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***, Complete CLI supported USB slot for edited restoration and auto backup OVERVIEW Lantech IPES-3424DSFP-2P is a high performance L2 + PoE managed industrial switch which provides L2 wire speed and advanced security function for network aggregation and backbone deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms including dynamic coupling ring, enhanced mode for easy configuration and aggregation ring*, comprehensive QoS, QoS by VLAN, advanced security including ACL L2/L3, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ* (double tag VLAN) which are important features required in train and large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and show on L2 map topology. Compliant with IEEE802.3at/af standard, the Lantech IPES-3424DSFP-2P is able to feed each PoE port up to 30Watts@54VDC providing the connected PD devices at Gigabit speed. It also supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD is still alive then sending power; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Per port PoE status explicits voltage, current, watt and poe temperature information. Lantech IPES-3424DSFP-2P features enhanced G.8032 ring which can be self-healed in less than 20ms for ring/chain topologies which covers dynamic coupling ring & aggregation ring* protection. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. The enhanced mode and dynamic coupling ring configuration have never been easier. It supports MSTP that allows RSTP over Vlan for redundant links. The ITU G.8032 Ring and RSTP can be co-existed in the same switch with different ports for the most flexible protection. The IPES-3424DSFP-2P also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IPES-3424DSFP-2P is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed when power back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection. DHCP option 82 and relay agent function (port&vlan based DHCP distribution) can offer the same IP address on port base or vlan base where there is need to replace the new device connecting to Lantech switches to avoid any network disruption. The built-in DHCP Option 82 server offers the convenience of police setting on the switch. Mac based DHCP server function assigns an IP address according to its MAC address to include dumb switches in DHCP network. The user friendly UI, innovative auto topology drawing and topology demo makes IPES-3424DSFP-2P much easier to get Datasheet Version 1.1 www.lantechcom.tw | info@lantechcom.tw

Industrial PoE Managed Switches lantEch" Pioneering Industrial and IP Networks hands-on. The IPES-3424DSFP-2P supports DMI interface that can correspond with DDM SFPs (Digital diagnostic monitor) to display the five parameters in Lantech’s UI, including optical output power, input power, temperature, laser bias current and transceiver supply voltage***. The TX power/RX power raw data is automatically converted to dB values for installer, making it easier to calculate the fiber distance. The complete CLI support allows professional setting. The exclusive environmental monitoring function...

Industrial PoE Managed Switches  Reset / Factory default button to restore factory setting SNMP Trap for alarm support  System Event Log, Email alert, SMS(mobile text) and Watch dog design to reboot switch if CPU is found Environmental sensor built-in to detect temperature, voltage, current and total PoE load and send out SNMP Provides EFT protection ±4K VDC for power line traps , SMS and emails if there is abnormal events  Supports ±8KV contact & ±15KV air Ethernet ESD TFTP/HTTP firmware upgrade; LantechTM InstaConfig** for multiple upgrade; USB for edited 2 DI/DO and 1 relay contact...

Transfer Rate 14,880pps for Ethernet port 148,800pps for Fast Ethernet port 1,488,000pps for Gigabit Ethernet port Marvell 800Mhz 256M Byte Jumbo frame IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration), IEC60870-2-2, IEC60068-2-30 5 years RJ-45 port # 1~# 24 support PoE at/af End-point, Alternative A mode. Per port provides up to 30W@54V capability. Positive (VCC+): RJ-45 pin 1,2. Software Specification SNMP v1 v2c, v3/ Web/Telnet/CLI Management PoE input voltage & Power feed voltage RFC 1215 Traps MIB, RFC 1213 MIBII RFC 1158 MIBII RFC 1157 SNMP MIB, RFC 1493...

Industrial PoE Managed Switches IGMP query and router port Flow Control 256 multicast groups and IGMP query GMRP** MVR Pressure for Half-duplex System Log SMTP/Text SMS Supports SMTP Server and 8 e-mail accounts for receiving event alert; can send SMS text alert via mobile SNMP Trap Up to 10 trap stations; trap types including:  Device cold start for IP surveillance application Bandwidth Support ingress packet filter and egress packet limit. The egress rate control supports all of packet type, Broadcast/Multicast packet, Broadcast packet only and all types of packet. The packet filter rate...